## Hardware Documentation
+For the version 1.0 schematic, PCB layout, and bill of materials please refer to [tag v1.0](https://github.com/skiselev/easy_z80/tree/v1.0)
+
### Schematic and PCB Layout
[Schematic - Version 1.1](KiCad/Easy_Z80-Schematic-1.1.pdf)
Connector | J2, J3 | Sub-D DE9M, Right Angle, PCB mount | 2 | Mouser [806-K22X-E9P-N-99](https://www.mouser.com/ProductDetail/806-K22X-E9P-N-99)
Connector | J4 | 2 Pin Header with Friction Lock | 1 | Mouser [571-6404562](https://www.mouser.com/ProductDetail/571-6404562)
Pin Header | J5 - J7 | 40x2 Pin Header, 2.54 mm Pitch, Right Angle | 1 | Mouser [571-9-103326-0](https://www.mouser.com/ProductDetail/571-9-103326-0)
-Capacitor | C1 - C14, C16 - C23 | 0.1 uF, MLCC, 5 mm Pitch | 22 | Mouser [594-K104K15X7RF53H5](https://www.mouser.com/ProductDetail/594-K104K15X7RF53H5)
-Capacitor | C15 | Do not populate | 1 | Do not populate this capacitor
+Capacitor | C1 - C14, C16 - C23 | 0.1 uF, MLCC, 5 mm Pitch | 22 | Mouser [594-K104K15X7RF53H5](https://www.mouser.com/ProductDetail/594-K104K15X7RF53H5)
Capacitor | C24 | 47 uF, 25V, Aluminum Organic Polymer | 1 | Mouser [80-A750EK476M1EAAE40](https://www.mouser.com/ProductDetail/80-A750EK476M1EAAE40)
-Resistor Array | RR1 - RR3 | 4.7 k, bussed, 5 pin SIP | 3 | Mouser [652-4605X-AP1-472LF](https://www.mouser.com/ProductDetail/652-4605X-AP1-472LF)
+Resistor Array | RN1 - RN3 | 4.7 k, bussed, 5 pin SIP | 3 | Mouser [652-4605X-AP1-472LF](https://www.mouser.com/ProductDetail/652-4605X-AP1-472LF)
+Resistor Array | RN4 | 4.7 k, bussed, 9 pin SIP | 1 | Mouser [652-4609X-AP1-472LF](https://www.mouser.com/ProductDetail/652-4609X-AP1-472LF)
Resistor | R1 | 470 ohm, axial | 1 | Mouser [603-MFR-25FBF52-470R](https://www.mouser.com/ProductDetail/603-MFR-25FBF52-470R)
Resistor | R2 - R4 | 10 kohm, 1% tolerance, axial | 3 | Mouser [603-MFR-25FRF5210K](https://www.mouser.com/ProductDetail/603-MFR-25FRF5210K)
Resistor | R5 | 29.4 kohm, 1% tolerance, axial | 1 | Mouser [603-MFR-25FBF52-29K4](https://www.mouser.com/ProductDetail/603-MFR-25FBF52-29K4)
### Changes
* Version 1.1
- * Add pull-up resistors on data bus (RN4 - 4.7k) to support interrupt mode 0
+ * Add pull-up resistors on the data bus (RN4 - 4.7k) to support Z80 interrupt mode 0
* Use 74HC series instead of 74HCT
* Remove C15
- * Fix silkscreen:
+ * Use RN reference for resistor arrays instead of RR
+ * Update silkscreen:
* Make RN1 reference and value visible
* Update silkscreen of headers footprints, so that JP1 and JP2 don't cover the traces
* Add project URL to the bottom silkscreen
* Schematic and top silkscreen: Use 74HC series instead of 74HCT
### Wishlist
-* Add pull-ups on the data bus to support extension boards that were not designed for Z80 interrupt mode 2
+* Version 1.0
+ * Add pull-ups on the data bus to support extension boards that were not designed for Z80 interrupt mode 2