From 5117853b1b572e66ef2a643becc90492029b3683 Mon Sep 17 00:00:00 2001 From: ceriel Date: Tue, 30 Mar 1993 15:43:44 +0000 Subject: [PATCH] Now uses -ms macros --- doc/em/.distr | 4 +- doc/em/READ_ME | 3 - doc/em/app.codes.nr | 162 ++++++++++++-------------- doc/em/app.exam.nr | 22 ++-- doc/em/assem.nr | 271 ++++++++++++++++++++++---------------------- doc/em/cont.nr | 10 +- doc/em/descr.nr | 77 ++++++------- doc/em/dspace.nr | 85 +++++++------- doc/em/em.i | 10 ++ doc/em/env.nr | 113 ++++++++---------- doc/em/intro.nr | 59 ++++------ doc/em/ispace.nr | 27 ++--- doc/em/mach.nr | 156 +++++++++++-------------- doc/em/macr.nr | 120 ++++++++++++++++---- doc/em/mapping.nr | 65 +++++------ doc/em/mem.nr | 18 +-- doc/em/title.nr | 11 +- doc/em/traps.nr | 58 +++++----- doc/em/types.nr | 43 +++---- 19 files changed, 647 insertions(+), 667 deletions(-) diff --git a/doc/em/.distr b/doc/em/.distr index 96790bdda..76d9cae6b 100644 --- a/doc/em/.distr +++ b/doc/em/.distr @@ -1,9 +1,7 @@ -Makefile +proto.make READ_ME -addend.n app.codes.nr app.exam.nr -app.int.nr assem.nr cont.nr descr.nr diff --git a/doc/em/READ_ME b/doc/em/READ_ME index d41e5c971..1d0ae71a4 100644 --- a/doc/em/READ_ME +++ b/doc/em/READ_ME @@ -3,7 +3,4 @@ DESCRIPTION OF A MACHINE ARCHITECTURE FOR USE WITH BLOCK STRUCTURED LANGUAGES The file em.i (text of the defining interpreter) was hand-edited from int/em.p -To print, set NROFF and TBL in the Makefile and call make. -It uses the kun macro package which is also distributed. - The directory int contains the interpreter. diff --git a/doc/em/app.codes.nr b/doc/em/app.codes.nr index 577863103..256e8b294 100644 --- a/doc/em/app.codes.nr +++ b/doc/em/app.codes.nr @@ -1,4 +1,4 @@ -.BP +.bp .AP "EM CODE TABLES" The following table is used by the assembler for EM machine language. @@ -10,65 +10,66 @@ Each line describes a range of interpreter opcodes by specifying for which instruction the range is used, the type of the opcodes (mini, shortie, etc..) and range for the instruction argument. -.A +.QQ The first field on each line gives the EM instruction mnemonic, the second field gives some flags. If the opcodes are minis or shorties the third field specifies how many minis/shorties are used. The last field gives the number of the (first) interpreter opcode. -.N 1 +.LP Flags : -.IS 3 -.N 1 +.IP "" Opcode type, only one of the following may be specified. -.PS - 5 " " -.PT \- +.RS +.IP \- opcode without argument -.PT m +.IP m mini -.PT s +.IP s shortie -.PT 2 +.IP 2 opcode with 2-byte signed argument -.PT 4 +.IP 4 opcode with 4-byte signed argument -.PT 8 +.IP 8 opcode with 8-byte signed argument -.PT u +.IP u opcode with 2-byte unsigned argument -.PE +.RE +.IP "" Secondary (escaped) opcodes. -.PS - 5 " " -.PT e +.RS +.IP e The opcode thus marked is in the secondary opcode group instead of the primary -.PE +.RE +.IP "" restrictions on arguments -.PS - 5 " " -.PT N +.RS +.IP N Negative arguments only -.PT P +.IP P Positive and zero arguments only -.PE +.RE +.IP "" mapping of arguments -.PS - 5 " " -.PT w +.RS +.IP w argument must be divisible by the wordsize and is divided by the wordsize before use as opcode argument. -.PT o +.IP o argument ( possibly after division ) must be >= 1 and is decremented before use as opcode argument -.PE -.IE +.RE +.LP If the opcode type is 2,4 or 8 the resulting argument is used as opcode argument (least significant byte first). -.N If the opcode type is mini, the argument is added to the first opcode \- if in range \- . If the argument is negative, the absolute value minus one is used in the algorithm above. -.N +.br For shorties with positive arguments the first opcode is used for arguments in the range 0..255, the second for the range 256..511, etc.. @@ -78,30 +79,32 @@ for arguments in the range \-1..\-256, the second for the range The byte following the opcode contains the least significant byte of the argument. First some examples of these specifications. -.PS - 5 -.PT "aar mwPo 1 34" +.IP "aar mwPo 1 34" +.br Indicates that opcode 34 is used as a mini for Positive instruction arguments only. The w and o indicate division and decrementing of the instruction argument. -Because the resulting argument must be zero ( only opcode 34 may be used -), this mini can only be used for instruction argument 2. +Because the resulting argument must be zero ( only opcode 34 may be used), +this mini can only be used for instruction argument 2. Conclusion: opcode 34 is for "AAR 2". -.PT "adp sP 1 41" +.IP "adp sP 1 41" +.br Opcode 41 is used as shortie for ADP with arguments in the range 0..255. -.PT "bra sN 2 60" +.IP "bra sN 2 60" +.br Opcode 60 is used as shortie for BRA with arguments \-1..\-256, 61 is used for arguments \-257..\-512. -.PT "zer e\- 145" +.IP "zer e\- 145" +.br Escaped opcode 145 is used for ZER. -.PE +.LP The interpreter opcode table: -.N 1 -.IS 3 +.DS .so itables -.IE -.P +.DE +.PP The table above results in the following dispatch tables. Dispatch tables are used by interpreters to jump to the routines implementing the EM instructions, indexed by the next opcode. @@ -110,60 +113,41 @@ of eight consecutive opcodes, preceded by the first opcode number on that line. Routine names consist of an EM mnemonic followed by a suffix. The suffices show the encoding used for each opcode. -.N +.LP The following suffices exist: -.N 1 -.VS 1 0 -.IS 4 -.PS - 11 -.PT .z -no arguments -.PT .l -16-bit argument -.PT .L -32-bit argument -.PT .u -16-bit unsigned argument -.PT .lw -16-bit argument divided by the wordsize -.PT .Lw -32-bit argument divided by the wordsize -.PT .p -positive 16-bit argument -.PT .P -positive 32-bit argument -.PT .pw -positive 16-bit argument divided by the wordsize -.PT .Pw -positive 32-bit argument divided by the wordsize -.PT .n -negative 16-bit argument -.PT .N -negative 32-bit argument -.PT .nw -negative 16-bit argument divided by the wordsize -.PT .Nw -negative 32-bit argument divided by the wordsize -.PT .s -shortie with as high order argument byte -.PT .w -shortie with argument divided by the wordsize -.PT . -mini with as argument -.PT .W -mini with *wordsize as argument -.PE 1 +.TS +tab(:); +l l. +.z:no arguments +.l:16-bit argument +.L:32-bit argument +.u:16-bit unsigned argument +.lw:16-bit argument divided by the wordsize +.Lw:32-bit argument divided by the wordsize +.p:positive 16-bit argument +.P:positive 32-bit argument +.pw:positive 16-bit argument divided by the wordsize +.Pw:positive 32-bit argument divided by the wordsize +.n:negative 16-bit argument +.N:negative 32-bit argument +.nw:negative 16-bit argument divided by the wordsize +.Nw:negative 32-bit argument divided by the wordsize +.s:shortie with as high order argument byte +.w:shortie with argument divided by the wordsize +.:mini with as argument +.W:mini with *wordsize as argument +.TE +.LP is a possibly negative integer. -.VS -.IE +.LP The dispatch table for the 256 primary opcodes: -.N 1 +.sp 1 .so dispat1 -.N 2 +.sp 2 The list of secondary opcodes (escape1): -.N 1 +.sp 1 .so dispat2 -.N 2 +.sp 2 Finally, the list of opcodes with four byte arguments (escape2). -.N 1 +.sp 1 .so dispat3 diff --git a/doc/em/app.exam.nr b/doc/em/app.exam.nr index 0897298f9..3080d6ad8 100644 --- a/doc/em/app.exam.nr +++ b/doc/em/app.exam.nr @@ -1,7 +1,7 @@ -.BP +.bp .AP "AN EXAMPLE PROGRAM" -.A 1 0 -.NA +.PP +.na .ta 4n 8n 12n 16n 20n .nf 1 program example(output); @@ -45,12 +45,12 @@ 39 test(r) 40 end. .fi -.AD -.BP +.ad +.bp The EM code as produced by the Pascal-VU compiler is given below. Comments have been added manually. Note that this code has already been optimized. -.A 1 0 -.NA +.LP +.na .nf .ta 1n 24n mes 2,2,2 ; wordsize 2, pointersize 2 @@ -231,14 +231,13 @@ have been added manually. Note that this code has already been optimized. end 0 mes 5 ; reals were used .fi -.AD -.A 1 0 +.ad +.PP The compact code corresponding to the above program is listed below. Read it horizontally, line by line, not column by column. Each number represents a byte of compact code, printed in decimal. The first two bytes form the magic word. -.N 1 -.IS 3 +.LP .Dr 33 173 0 159 122 122 122 255 242 1 161 250 124 116 46 112 0 255 156 245 40 2 245 0 128 120 155 249 123 115 117 109 160 @@ -274,4 +273,3 @@ The first two bytes form the magic word. 116 8 122 69 120 20 249 124 95 104 108 116 8 122 152 120 159 124 160 255 159 125 255 .De -.IE diff --git a/doc/em/assem.nr b/doc/em/assem.nr index 51cf192a2..59ea75536 100644 --- a/doc/em/assem.nr +++ b/doc/em/assem.nr @@ -1,6 +1,6 @@ -.BP -.SN 11 -.S1 "EM ASSEMBLY LANGUAGE" +.bp +.P1 "EM ASSEMBLY LANGUAGE" +.PP We use two representations for assembly language programs, one is in ASCII and the other is the compact assembly language. The latter needs less space than the first for the same program @@ -16,7 +16,8 @@ The last part lists the EM instructions with the type of arguments allowed and an indication of the function. Appendix A gives a detailed description of the effect of all instructions in the form of a Pascal program. -.S2 "ASCII assembly language" +.P2 "ASCII assembly language" +.PP An assembly language program consists of a series of lines, each line may be blank, contain one (pseudo)instruction or contain one label. @@ -25,13 +26,13 @@ Upper case is used in this document merely to distinguish keywords from the surrounding prose. Comment is allowed at the end of each line and starts with a semicolon ";". This kind of comment does not exist in the compact form. -.A +.QQ Labels must be placed all by themselves on a line and start in column 1. There are two kinds of labels, instruction and data labels. Instruction labels are unsigned positive integers. The scope of an instruction label is its procedure. -.A +.QQ The pseudoinstructions CON, ROM and BSS may be preceded by a line containing a 1\-8 character data label, the first character of which is a @@ -46,13 +47,13 @@ These labels are considered as a special case and handled more efficiently in compact assembly language (see below). Note that a data label on its own or two consecutive labels are not allowed. -.P +.PP Each statement may contain an instruction mnemonic or pseudoinstruction. These must begin in column 2 or later (not column 1) and must be followed by a space, tab, semicolon or LF. Everything on the line following a semicolon is taken as a comment. -.P +.PP Each input file contains one module. A module may contain many procedures, which may be nested. @@ -62,14 +63,15 @@ collection of instructions and pseudoinstructions and finally an END statement. Pseudoinstructions are also allowed between procedures. They do not belong to a specific procedure. -.P +.PP All constants in EM are interpreted in the decimal base. The ASCII assembly language accepts constant expressions wherever constants are allowed. The operators recognized are: +, \-, *, % and / with the usual precedence order. Use of the parentheses ( and ) to alter the precedence order is allowed. -.S3 "Instruction arguments" +.P3 "Instruction arguments" +.PP Unlike many other assembly languages, the EM assembly language requires all arguments of normal and pseudoinstructions to be either a constant or an identifier, but not a combination @@ -87,7 +89,7 @@ It is not allowed to add or subtract from instruction labels or procedure identifiers, which certainly is not a severe restriction and greatly aids optimization. -.P +.PP Instruction arguments can be constants, data labels, data labels offsetted by a constant, instruction labels and procedure identifiers. @@ -98,7 +100,7 @@ that fit in a word. Arguments used as offsets to pointers should fit in a pointer-sized integer. Finally, arguments to LDC should fit in a double-word integer. -.P +.PP Several instructions have two possible forms: with an explicit argument and with an implicit argument on top of the stack. The size of the implicit argument is the wordsize. @@ -109,7 +111,7 @@ integers on top of the stack are to be compared. on top of the stack that specifies the size of the integers to be compared. Thus the following two sequences are equivalent: -.N 1 +.KS .TS center, tab(:) ; l r 30 l r. @@ -118,16 +120,18 @@ LDL:\-14:LDL:\-14 ::LOC:4 CMI:4:CMI: ZEQ:*1:ZEQ:*1 -.TE 1 +.TE +.KE Section 11.1.6 shows the arguments allowed for each instruction. -.S3 "Pseudoinstruction arguments" +.P3 "Pseudoinstruction arguments" +.PP Pseudoinstruction arguments can be divided in two classes: Initializers and others. The following initializers are allowed: signed integer constants, unsigned integer constants, floating-point constants, strings, data labels, data labels offsetted by a constant, instruction labels and procedure identifiers. -.P +.PP Constant initializers in BSS, HOL, CON and ROM pseudoinstructions can be followed by a letter I, U or F. This indicator @@ -142,10 +146,9 @@ As in instruction arguments, initializers include expressions of the form: \&"LABEL+offset" and "LABEL\-offset". The offset must be an unsigned decimal constant. The 'IUF' indicators cannot be used in the offsets. -.P +.PP Data labels are referred to by their name. -.P - +.PP Strings are surrounded by double quotes ("). Semicolon's in string do not indicate the start of comment. In the ASCII representation the escape character \e (backslash) @@ -153,7 +156,6 @@ alters the meaning of subsequent character(s). This feature allows inclusion of zeroes, graphic characters and the double quote in the string. The following escape sequences exist: -.DS .TS center, tab(:); l l l. @@ -166,7 +168,6 @@ backslash:\e:\e\e double quote:":\e" bit pattern:\fBddd\fP:\e\fBddd\fP .TE -.DE The escape \fB\eddd\fP consists of the backslash followed by 1, 2, or 3 octal digits specifying the value of the desired character. @@ -176,17 +177,18 @@ the backslash is ignored. Example: CON "hello\e012\e0". Each string element initializes a single byte. The ASCII character set is used to map characters onto values. -.P +.PP Instruction labels are referred to as *1, *2, etc. in both branch instructions and as initializers. -.P +.PP The notation $procname means the identifier for the procedure with the specified name. This identifier has the size of a pointer. -.S3 Notation +.P3 Notation +.PP First, the notation used for the arguments, classes of instructions and pseudoinstructions. -.IS 2 +.DS .TS tab(:); l l l. @@ -204,9 +206,10 @@ l l l. <...>+:\&=:one or more of <...> [...]:\&=:optional ... .TE -.IE -.S3 "Pseudoinstructions" -.S4 "Storage declaration" +.DE +.P3 "Pseudoinstructions" +.P4 "Storage declaration" +.PP Initialized global data is allocated by the pseudoinstruction CON, which needs at least one argument. Each argument is used to allocate and initialize a number of @@ -215,7 +218,7 @@ The number of bytes to be allocated and the alignment depend on the type of the argument. For each argument, an integral number of words, determined by the argument type, is allocated and initialized. -.P +.PP The pseudoinstruction ROM is the same as CON, except that it guarantees that the initialized words will not change during the execution of the program. @@ -223,7 +226,7 @@ This information allows optimizers to do certain calculations such as array indexing and subrange checking at compile time instead of at run time. -.P +.PP The pseudoinstruction BSS allocates uninitialized global data or large blocks of data initialized by the same value. @@ -239,14 +242,14 @@ the second byte by 1 etc. in assembly language. The assembler/loader adds the base address of the HOL block to these numbers to obtain the absolute address in the machine language. -.P +.PP The scope of a HOL block starts at the HOL pseudo and ends at the next HOL pseudo or at the end of a module whatever comes first. Each instruction falls in the scope of at most one HOL block, the current HOL block. It is not allowed to have more than one HOL block per procedure. -.P +.PP The alignment restrictions are enforced by the pseudoinstructions. All initializers are aligned on a multiple of their size or the wordsize @@ -257,52 +260,51 @@ Switching to another type of fragment or placing a label forces word-alignment. There are three types of fragments in global data space: CON, ROM and BSS/HOL. -.N 1 -.IS 2 -.PS - 4 -.PT "BSS ,," +.IP "BSS ,," +.br Reserve bytes. is the value used to initialize the area. must be a multiple of the size of . is 0 if the initialization is not strictly necessary, 1 if it is. -.PT "HOL ,," +.IP "HOL ,," +.br Idem, but all following absolute global data references will refer to this block. Only one HOL is allowed per procedure, it has to be placed before the first instruction. -.PT "CON +" +.IP "CON +" +.br Assemble global data words initialized with the constants. -.PT "ROM +" +.IP "ROM +" +.br Idem, but the initialized data will never be changed by the program. -.PE -.IE -.S4 "Partitioning" +.P4 "Partitioning" +.PP Two pseudoinstructions partition the input into procedures: -.IS 2 -.PS - 4 -.PT "PRO [,]" +.IP "PRO [,]" +.br Start of procedure. is the procedure name. is the number of bytes for locals. The number of bytes for locals must be specified in the PRO or END pseudoinstruction. When specified in both, they must be identical. -.PT "END []" +.IP "END []" +.br End of Procedure. is the number of bytes for locals. The number of bytes for locals must be specified in either the PRO or END pseudoinstruction or both. -.PE -.IE -.S4 "Visibility" +.P4 "Visibility" +.PP Names of data and procedures in an EM module can either be internal or external. External names are known outside the module and are used to link several pieces of a program. Internal names are not known outside the modules they are used in. Other modules will not 'see' an internal name. -.A +.QQ To reduce the number of passes needed, it must be known at the first occurrence whether a name is internal or external. @@ -312,47 +314,51 @@ If the first occurrence of a name is a reference, the name is considered to be external. If the first occurrence is in one of the following pseudoinstructions, the effect of the pseudo has precedence. -.IS 2 -.PS - 4 -.PT "EXA " +.IP "EXA " +.br External name. is known, possibly defined, outside this module. Note that may be defined in the same module. -.PT "EXP " +.IP "EXP " +.br External procedure identifier. Note that may be defined in the same module. -.PT "INA " +.IP "INA " +.br Internal name. is internal to this module and must be defined in this module. -.PT "INP " +.IP "INP " +.br Internal procedure. is internal to this module and must be defined in this module. -.PE -.IE -.S4 "Miscellaneous" +.P4 "Miscellaneous" +.PP Two other pseudoinstructions provide miscellaneous features: -.IS 2 -.PS - 4 -.PT "EXC ," +.IP "EXC ," +.br Two blocks of instructions preceding this one are interchanged before being processed. gives the number of lines of the first block. gives the number of lines of the second one. Blank and pure comment lines do not count. This instruction is obsolete. Its use is strongly discouraged. -.PT "MES [,]*" +.IP "MES [,]*" +.br A special type of comment. Used by compilers to communicate with the optimizer, assembler, etc. as follows: -.VS 1 0 -.PS - 4 -.PT "MES 0" +.RS +.IP "MES 0" +.br An error has occurred, stop further processing. -.PT "MES 1" +.IP "MES 1" +.br Suppress optimization. -.PT "MES 2,," +.IP "MES 2,," +.br Use wordsize and pointer size . -.PT "MES 3,,,," +.IP "MES 3,,,," +.br Indicates that a local variable is never referenced indirectly. Used to indicate that a register may be used for a specific variable. @@ -361,51 +367,57 @@ and offset from LB if negative. gives the size of the variable. indicates the class of the variable. The following values are currently recognized: -.PS -.PT 0 -The variable can be used for anything. -.PT 1 -The variable is used as a loopindex. -.PT 2 -The variable is used as a pointer. -.PT 3 -The variable is used as a floating point number. -.PE 0 +.br +0\0\0\0The variable can be used for anything. +.br +1\0\0\0The variable is used as a loopindex. +.br +2\0\0\0The variable is used as a pointer. +.br +3\0\0\0The variable is used as a floating point number. +.br gives the priority of the variable, higher numbers indicate better candidates. -.PT "MES 4,," +.IP "MES 4,," +.br Number of source lines in file (for profiler). -.PT "MES 5" +.IP "MES 5" +.br Floating point used. -.PT "MES 6,*" +.IP "MES 6,*" +.br Comment. Used to provide comments in compact assembly language. -.PT "MES 7,....." +.IP "MES 7,....." +.br Reserved. -.PT "MES 8,[,]..." +.IP "MES 8,[,]..." +.br Library module. Indicates that the module may only be loaded if it is useful, that is, if it can satisfy any unresolved references during the loading process. May not be preceded by any other pseudo, except MES's. -.PT "MES 9," +.IP "MES 9," +.br Guarantees that no more than bytes of parameters are accessed, either directly or indirectly. -.PT "MES 10,[,]* +.IP "MES 10,[,]* +.br This message number is reserved for the global optimizer. It inserts these messages in its output as hints to backends. indicates the type of hint. -.PT "MES 11" +.IP "MES 11" +.br Procedures containing this message are possible destinations of non-local goto's with the GTO instruction. Some backends keep locals in registers, the locals in this procedure should not be kept in registers and all registers containing locals of other procedures should be saved upon entry to this procedure. -.PE 1 -.VS +.RE +.IP "" Each backend is free to skip irrelevant MES pseudos. -.PE -.IE -.S2 "The Compact Assembly Language" +.P2 "The Compact Assembly Language" +.PP The assembler accepts input in a highly encoded form. This form is intended to reduce the amount of file transport between the @@ -414,16 +426,14 @@ and back ends, and also reduces the amount of storage required for storing libraries. Libraries are stored as archived compact assembly language, not machine language. -.P +.PP When beginning to read the input, the assembler is in neutral state, and expects either a label or an instruction (including the pseudoinstructions). The meaning of the next byte(s) when in neutral state is as follows, where b1, b2 etc. represent the succeeding bytes. -.N 1 -.DS .TS -tab(:) ; +tab(:); rw17 4 l. 0:Reserved for future use 1\-129:Machine instructions, see Appendix A, alphabetical list @@ -433,38 +443,31 @@ rw17 4 l. 180\-239:Instruction labels 0 \- 59 (180 is local label 0 etc.) 240\-244:See the Common Table below 245\-255:Not used -.TE 1 -.DE 0 +.TE After a label, the assembler is back in neutral state; it can immediately accept another label or an instruction in the next byte. No linefeeds are used to separate lines. -.P +.PP If an opcode expects no arguments, the assembler is back in neutral state after reading the one byte containing the instruction number. If it has one or more arguments (only pseudos have more than 1), the arguments follow directly, encoded as follows: -.N 1 -.IS 2 .TS tab(:); r l. 0\-239:Offsets from \-120 to 119 - 240\-255:See the Common Table below -.TE 1 +.TE Absence of an optional argument is indicated by a special byte. -.IE 2 -.NE 7 -.CS -Common Table for Neutral State and Arguments -.CE .TS tab(:); +c s s s c c s c l4 l l4 l. +Common Table for Neutral State and Arguments class:bytes:description :240:b1:Instruction label b1 (Not used for branches) @@ -486,7 +489,7 @@ class:bytes:description :255::Delimiter for argument lists or :::indicates absence of optional argument .TE 1 -.P +.PP The bytes specifying the value of a 16, 32 or 64 bit constant are presented in two's complement notation, with the least significant byte first. For example: the value of a 32 bit @@ -494,25 +497,22 @@ constant is ((s4*256+b3)*256+b2)*256+b1, where s4 is b4\-256 if b4 is greater than 128 else s4 takes the value of b4. A consists of a immediately followed by a sequence of bytes with length . -.P +.PP .ne 8 The pseudoinstructions fall into several categories, depending on their arguments: -.N 1 .DS - Group 1 \- EXC, BSS, HOL have a known number of arguments - Group 2 \- EXA, EXP, INA, INP have a string as argument - Group 3 \- CON, MES, ROM have a variable number of various things - Group 4 \- END, PRO have a trailing optional argument. -.DE 1 +Group 1 \- EXC, BSS, HOL have a known number of arguments +Group 2 \- EXA, EXP, INA, INP have a string as argument +Group 3 \- CON, MES, ROM have a variable number of various things +Group 4 \- END, PRO have a trailing optional argument. +.DE Groups 1 and 2 use the encoding described above. Group 3 also uses the encoding listed above, with an byte after the last argument to indicate the end of the list. Group 4 uses an byte if the trailing argument is not present. -.N 2 -.IS 2 .TS tab(|); l s l @@ -523,18 +523,17 @@ Example ASCII|Example compact 2||182 1||181 - LOC|10|69 130 - LOC|\-10|69 110 - LOC|300|69 245 44 1 - BRA|*19|18 139 +\0LOC|10|69 130 +\0LOC|\-10|69 110 +\0LOC|300|69 245 44 1 +\0BRA|*19|18 139 300||241 44 1 .3||242 3 - CON|4,9,*2,$foo|151 124 129 240 2 249 123 102 111 111 255 - CON|.35|151 242 35 255 -.TE 0 -.IE 0 -.S2 "Assembly language instruction list" -.P +\0CON|4,9,*2,$foo|151 124 129 240 2 249 123 102 111 111 255 +\0CON|.35|151 242 35 255 +.TE +.P2 "Assembly language instruction list" +.PP For each instruction in the list the range of argument values in the assembly language is given. The column headed \fIassem\fP contains the mnemonics defined @@ -558,7 +557,7 @@ are indicated by letters: .ds z \fBz\fP .ds o \fBo\fP .ds - \fB\-\fP -.N 1 +.sp .TS tab(:); c s l l @@ -579,8 +578,8 @@ l l 15 l l. \&\*b:ilb:>= 0:label number \&\*r:cst:0,1,2:register number \&\*-:::no argument -.TE 1 -.P +.TE +.PP The * at the rationale for \*w indicates that the argument can either be given as argument or on top of the stack. If the argument is omitted, the argument is fetched from the @@ -589,8 +588,7 @@ it is assumed to be a wordsized unsigned integer. Instructions that check for undefined integer or floating-point values and underflow or overflow are indicated below by (*). -.N 1 -.VS 0 0 +.sp 1 .DS .ta 12n GROUP 1 \- LOAD @@ -687,7 +685,7 @@ GROUP 7 \- INCREMENT/DECREMENT/ZERO ZER \*w : Load \*w zero bytes .DE -.DS \" ??? +.DS GROUP 8 \- CONVERT (stack: source, source size, dest. size (top)) CII \*- : Convert integer to integer (*) @@ -744,7 +742,7 @@ GROUP 12 \- COMPARE TGT \*- : True if greater, i.e. iff top of stack > 0 .DE -.DS \" ??? +.DS GROUP 13 \- BRANCH BRA \*b : Branch unconditionally to label \*b @@ -801,5 +799,4 @@ GROUP 15 \- MISCELLANEOUS SIM \*- : Store 16 bit ignore mask STR \*r : Store register (0=LB, 1=SP, 2=HP) TRP \*- : Cause trap to occur (Error number on stack) -.DE 0 -.VS +.DE diff --git a/doc/em/cont.nr b/doc/em/cont.nr index b020dca06..e61369f64 100644 --- a/doc/em/cont.nr +++ b/doc/em/cont.nr @@ -1,6 +1,4 @@ -.MS T A 0 -.ME -.BP -.MS B A 0 -.ME -.CT +.de PT +.. +.bp +.Ct diff --git a/doc/em/descr.nr b/doc/em/descr.nr index f4145e7ba..7035a6ea5 100644 --- a/doc/em/descr.nr +++ b/doc/em/descr.nr @@ -1,69 +1,62 @@ -.SN 7 -.BP -.S1 "DESCRIPTORS" +.bp +.P1 "DESCRIPTORS" +.PP Several instructions use descriptors, notably the range check instruction, the array instructions, the goto instruction and the case jump instructions. Descriptors reside in data space. They may be constructed at run time, but more often they are fixed and allocated in ROM data. -.P +.PP All instructions using descriptors, except GTO, have as argument the size of the integers in the descriptor. All implementations have to allow integers of the size of a word in descriptors. All integers popped from the stack and used for indexing or comparing must have the same size as the integers in the descriptor. -.S2 "Range check descriptors" +.P2 "Range check descriptors" +.PP Range check descriptors consist of two integers: -.IS 2 -.PS 1 4 "" . -.PT +.IP 1. lower bound signed -.PT +.IP 2. upper bound signed -.PE -.IE +.LP The range check instruction checks an integer on the stack against these bounds and causes a trap if the value is outside the interval. The value itself is neither changed nor removed from the stack. -.S2 "Array descriptors" +.P2 "Array descriptors" +.PP Each array descriptor describes a single dimension. For multi-dimensional arrays, several array instructions are needed to access a single element. Array descriptors contain the following three integers: -.IS 2 -.PS 1 4 "" . -.PT +.IP 1. lower bound signed -.PT +.IP 2. upper bound \- lower bound unsigned -.PT +.IP 3. number of bytes per element unsigned -.PE -.IE +.LP The array instructions LAR, SAR and AAR have the pointer to the start of the descriptor as operand on the stack. -.sp +.LP The element A[I] is fetched as follows: -.IS 2 -.PS 1 4 "" . -.PT +.IP 1. Stack the address of A (e.g., using LAE or LAL) -.PT +.IP 2. Stack the value of I (n-byte integer) -.PT +.IP 3. Stack the pointer to the descriptor (e.g., using LAE) -.PT +.IP 4. LAR n (n is the size of the integers in the descriptor and I) -.PE -.IE +.LP All array instructions first pop the address of the descriptor and the index. If the index is not within the bounds specified, a trap occurs. If ok, (I~\-~lower bound) is multiplied by the number of bytes per element (the third word). The result is added to the address of A and replaces A on the stack. -.A +.QQ At this point LAR, SAR and AAR diverge. AAR is finished. LAR pops the address and fetches the data item, @@ -71,21 +64,19 @@ the size being specified by the descriptor. The usual restrictions for memory access must be obeyed. SAR pops the address and stores the data item now exposed. -.S2 "Non-local goto descriptors" +.P2 "Non-local goto descriptors" +.PP The GTO instruction provides a way of returning directly to any active procedure invocation. The argument of the instruction is the address of a descriptor containing three pointers: -.IS 2 -.PS 1 4 "" . -.PT +.IP 1. value of PC after the jump -.PT +.IP 2. value of SP after the jump -.PT +.IP 3. value of LB after the jump -.PE -.IE +.LP GTO replaces the loads PC, SP and LB from the descriptor, thereby jumping to a procedure and removing zero or more frames from the stack. @@ -94,7 +85,8 @@ dynamically enclosing procedure, because some EM implementations will need to backtrack through the dynamic chain and use the implementation dependent data in frames to restore registers etc. -.S2 "Case descriptors" +.P2 "Case descriptors" +.PP The case jump instructions CSA and CSB both provide multiway branches selected by a case index. Both fetch two operands from the stack: @@ -106,7 +98,7 @@ Therefore, the descriptors for CSA and CSB, as shown in figure 4, are different. All pointers in the table must be addresses of instructions in the procedure executing the case instruction. -.P +.PP CSA selects the new PC by indexing. If the index, a signed integer, is greater than or equal to the lower bound and less than or equal to the upper bound, @@ -116,23 +108,22 @@ The table does not contain the value of the upper bound, but the value of upper-lower as an unsigned integer. The default instruction pointer is used when the index is out of bounds. If the resulting PC is 0, then trap. -.P +.PP CSB selects the new PC by searching. The table is searched for an entry with index value equal to the case index. That entry or, if none is found, the default entry contains the new PC. When the resulting PC is 0, a trap is performed. -.P +.PP The choice of which case instruction to use for each source language case statement is up to the front end. If the range of the index value is dense, i.e .DS (highest value \- lowest value) / number of cases -.DE 1 +.DE is less than some threshold, then CSA is the obvious choice. If the range is sparse, CSB is better. -.N 2 .Dr 30 |--------------------| |--------------------| high address | pointer for upb | | pointer n-1 | diff --git a/doc/em/dspace.nr b/doc/em/dspace.nr index 620de3be1..810520db9 100644 --- a/doc/em/dspace.nr +++ b/doc/em/dspace.nr @@ -1,6 +1,6 @@ -.BP -.SN 4 -.S1 "DATA ADDRESS SPACE" +.bp +.P1 "DATA ADDRESS SPACE" +.PP The data address space is divided into three parts, called 'areas', each with its own addressing method: global data area, @@ -9,24 +9,24 @@ and heap data area. These data areas must be part of the same address space because all data is accessed by the same type of pointers. -.P +.PP Space for global data is reserved using several pseudoinstructions in the assembly language, as described in the next paragraph and chapter 11. The size of the global data area is fixed per program. -.A +.QQ Global data is addressed absolutely in the machine language. Many instructions are available to address global data. They all have an absolute address as argument. Examples are LOE, LAE and STE. -.P +.PP Part of the global data area is initialized by the compiler, the rest is not initialized at all or is initialized with a value, typically \-32768 or 0. Part of the initialized global data may be made read-only if the implementation supports protection. -.P +.PP The local data area is used as a stack, which grows from high to low addresses and contains some data for each active procedure @@ -44,14 +44,14 @@ Variables in other active procedures are addressed by following the chain of statically enclosing procedures using the LXL or LXA instruction. The variables in dynamically enclosing procedures can be addressed with the use of the DCH instruction. -.A +.QQ Many instructions have offsets to LB as argument, for instance LOL, LAL and STL. The arguments of these instructions range from \-1 to some (negative) minimum for the access of local storage and from 0 to some (positive) maximum for parameter access. -.P +.PP The procedure call instructions CAL and CAI each create a new frame on the stack. Each procedure has an assembly-time parameter specifying @@ -62,7 +62,7 @@ Each procedure, therefore, starts with a stack with the local variables already allocated. The return instructions RET and RTT remove a frame. The actual parameters must be removed by the calling procedure. -.P +.PP RET may copy some words from the stack of the returning procedure to an unnamed 'function return area'. This area is available for 'READ-ONCE' access using the LFR instruction. @@ -86,7 +86,7 @@ area is twice the pointer size, because we want to be able to handle 'procedure instance identifiers' which consist of a procedure identifier and the LB of a frame belonging to that procedure. -.P +.PP The heap data area grows upwards, to higher numbered addresses. It is initially empty. @@ -96,7 +96,8 @@ The heap pointer may be manipulated by the LOR and STR instructions. The heap can only be addressed indirectly, by pointers derived from previous values of HP. -.S2 "Global data area" +.P2 "Global data area" +.PP The initial size of the global data area is determined at assembly time. Global data is allocated by several pseudoinstructions in the EM assembly @@ -109,7 +110,7 @@ under certain conditions, several blocks are allocated in a single fragment. This guarantees that the bytes of these blocks are consecutive. -.P +.PP Global data is addressed absolutely in binary machine language. Most compilers, however, @@ -124,7 +125,7 @@ It is the task of the assembler/loader to translate these labels into absolute addresses. These labels may also be used in CON and ROM pseudoinstructions to initialize pointers. -.P +.PP The pseudoinstruction CON allocates initialized data. ROM acts like CON but indicates that the initialized data will not change during execution of the program. @@ -134,7 +135,7 @@ data. The pseudoinstruction HOL is similar to BSS, but it alters the meaning of subsequent absolute addressing in the assembly language. -.P +.PP Another type of global data is a small block, called the ABS block, with an implementation defined size. Storage in this type of block can only be addressed @@ -146,7 +147,7 @@ update this counter. A pointer at location 4 points to a string containing the current source file name. The instruction FIL can be used to update the pointer. -.P +.PP All numeric arguments of the instructions that address the global data area refer to locations in the ABS block unless @@ -158,7 +159,7 @@ Thus LOE 0 loads the zeroth word of the most recent HOL, unless no HOL has appeared in the current file so far, in which case it loads the zeroth word of the ABS fragment. -.P +.PP The global data area is highly fragmented. The ABS block and each HOL and BSS block are separate fragments. The way fragments are formed from CON and ROM blocks is more complex. @@ -169,12 +170,11 @@ allocated consecutively in a single fragment, unless these CON pseudos are separated in the assembly language program by a data label definition or one or more of the following pseudos: .DS - - ROM, BSS, HOL and END - +ROM, BSS, HOL and END .DE An analogous rule holds for ROM pseudos. -.S2 "Local data area" +.P2 "Local data area" +.PP The local data area consists of a sequence of frames, one for each active procedure. Below the frame of the current procedure resides the @@ -183,17 +183,15 @@ Frames are generated by procedure calls and are removed by procedure returns. A procedure frame consists of six 'zones': .DS - - 1. The return status block - 2. The local variables and compiler temporaries - 3. The register save block - 4. The dynamic local generators - 5. The operand stack. - 6. The parameters of a procedure one level deeper - +1. The return status block +2. The local variables and compiler temporaries +3. The register save block +4. The dynamic local generators +5. The operand stack. +6. The parameters of a procedure one level deeper .DE A sample frame is shown in Figure 1. -.P +.PP Before a procedure call is performed the actual parameters are pushed onto the stack of the calling procedure. The exact details are compiler dependent. @@ -216,11 +214,11 @@ These instructions assume that this parameter contains the LB of the statically enclosing procedure. Procedures that do not have a dynamically enclosing procedure do not need a static link at offset 0. -.P +.PP Two instructions are available to perform procedure calls, CAL and CAI. Several tasks are performed by these call instructions. -.A +.QQ First, a part of the status of the calling procedure is saved on the stack in the return status block. This block should contain the return address of the calling @@ -235,12 +233,12 @@ The stack frames need not be contiguous then and the first status save area can contain the parameter base AB, which has the value of SP just after the last parameter has been pushed. -.A +.QQ Second, the LB is changed to point to the first word above the local variables. The new LB is a copy of the SP after the return status block has been pushed. -.A +.QQ Third, the amount of local storage needed by the procedure is reserved. The parameters and local storage are accessed by the same instructions. @@ -256,28 +254,28 @@ The initial value of the allocated words is not defined, but implementations that check for undefined values will probably initialize them with a special 'undefined' pattern, typically \-32768. -.A +.QQ Fourth, any EM implementation is allowed to reserve a variable size block beneath the local variables. This block could, for example, be used to save a variable number of registers. -.A +.QQ Finally, the address of the entry point of the called procedure is loaded into the Program Counter. -.P +.PP The ASP instruction can be used to allocate further (dynamic) local storage. The base address of such storage must be obtained with a LOR~SP instruction. This same instruction ASP may also be used to remove some words from the stack. -.P +.PP There is a version of ASP, called ASS, which fetches the number of bytes to allocate from the stack. It can be used to allocate space for local objects whose size is unknown at compile time, so called 'dynamic local generators'. -.P +.PP Control is returned to the calling procedure with a RET instruction. Any return value is then copied to the 'function return area'. The frame created by the call is deallocated and the status of @@ -293,7 +291,7 @@ Violating this restriction might result in hard to detect errors. The calling procedure has to remove the parameters from the stack. This can be done with the aforementioned ASP instruction. -.P +.PP Each procedure frame is a separate fragment. Because any fragment may be placed anywhere in memory, procedure frames need not be contiguous. @@ -345,7 +343,8 @@ procedure frames need not be contiguous. .Df Figure 1. A sample procedure frame and parameters. .De -.S2 "Heap data area" +.P2 "Heap data area" +.PP The heap area starts empty, with HP pointing to the low end of it. HP always contains a word address. @@ -360,7 +359,7 @@ are allocated to the heap. The heap may not grow into a part of memory that is already allocated. When this is attempted, the STR instruction will cause a trap to occur. In this case, HP retains its old value. -.P +.PP The only way to address the heap is indirectly. Whenever an object is allocated by increasing HP, then the old HP value must be saved and can be used later to address @@ -370,7 +369,7 @@ is no longer part of the heap, then an attempt to access the object is not allowed. Furthermore, if the heap pointer is increased again to above the object address, then access to the old object gives undefined results. -.P +.PP The heap is a single fragment. All bytes have consecutive addresses. No limits are imposed on the size of the heap as long as it fits diff --git a/doc/em/em.i b/doc/em/em.i index 1335029e1..20b05fe8b 100644 --- a/doc/em/em.i +++ b/doc/em/em.i @@ -1,3 +1,10 @@ +.bp +.AP "EM INTERPRETER" +.nf +.ft CW +.lg 0 +.nr x \w' ' +.ta \nxu +\nxu +\nxu +\nxu +\nxu +\nxu +\nxu +\nxu +\nxu +\nxu { This is an interpreter for EM. It serves as the official machine definition. This interpreter must run on a machine which supports @@ -1666,3 +1673,6 @@ case insr of writeln('halt with exit status: ',exitstatus:1); doident; end. +.ft P +.lg 1 +.fi diff --git a/doc/em/env.nr b/doc/em/env.nr index 6d7b9a105..45ead04a6 100644 --- a/doc/em/env.nr +++ b/doc/em/env.nr @@ -1,56 +1,43 @@ -.SN 8 -.VS 1 0 -.BP -.S1 "ENVIRONMENT INTERACTIONS" +.bp +.P1 "ENVIRONMENT INTERACTIONS" +.PP EM programs can interact with their environment in three ways. Two, starting/stopping and monitor calls, are dealt with in this chapter. The remaining way to interact, interrupts, will be treated together with traps in chapter 9. -.S2 "Program starting and stopping" +.P2 "Program starting and stopping" +.PP EM user programs start with a call to a procedure called _m_a_i_n. The assembler and backends look for the definition of a procedure with this name in their input. The call passes three parameters to the procedure. The parameters are similar to the parameters supplied by the -UNIX -.FS -UNIX is a Trademark of Bell Laboratories. -.FE +.UX operating system to C programs. -These parameters are often called -.BW argc , -.B argv -and -.BW envp . +These parameters are often called \fBargc\fP, \fBargv\fP and \fBenvp\fP. Argc is the parameter nearest to LB and is a wordsized integer. The other two are pointers to the first element of an array of string pointers. -.N -The -.B argv -array contains -.B argc +The \fBargv\fP array contains \fBargc\fP strings, the first of which contains the program call name. -The other strings in the -.B argv +The other strings in the \fBargv\fP array are the program parameters. -.P -The -.B envp +.PP +The \fBenvp\fP array contains strings in the form "name=string", where 'name' is the name of an environment variable and string its value. -The -.B envp +The \fBenvp\fP is terminated by a zero pointer. -.P +.PP An EM user program stops if the program returns from the first invocation of _m_a_i_n. The contents of the function return area are used to procure a wordsized program return code. EM programs also stop when traps and interrupts occur that are not caught and when the exit monitor call is executed. -.S2 "Input/Output and other monitor calls" +.P2 "Input/Output and other monitor calls" +.PP EM differs from most conventional machines in that it has high level i/o instructions. Typical instructions are OPEN FILE and READ FROM FILE instead @@ -58,7 +45,7 @@ of low level instructions such as setting and clearing bits in device registers. By providing such high level i/o primitives, the task of implementing EM on various non EM machines is made considerably easier. -.P +.PP I/O is initiated by the MON instruction, which expects an iocode on top of the stack. Often there are also parameters which are pushed on the @@ -68,45 +55,35 @@ Some i/o functions also provide results, which are returned on the stack. In the list of monitor calls we use several types of parameters and results, these types consist of integers and unsigneds of varying sizes, but never smaller than the wordsize, and the two pointer types. -.N 1 +.LP The names of the types used are: -.IS 4 -.PS - 10 -.PT int -an integer of wordsize -.PT int2 -an integer whose size is the maximum of the wordsize and 2 -bytes -.PT int4 -an integer whose size is the maximum of the wordsize and 4 -bytes -.PT intp -an integer with the size of a pointer -.PT uns2 -an unsigned integer whose size is the maximum of the wordsize and 2 -.PT unsp -an unsigned integer with the size of a pointer -.PT ptr -a pointer into data space -.PE 1 -.IE 0 +.DS +.TS +tab(:); +l l. +int:an integer of wordsize +int2:an integer whose size is the maximum of the wordsize and 2 bytes +int4:an integer whose size is the maximum of the wordsize and 4 bytes +intp:an integer with the size of a pointer +uns2:an unsigned integer whose size is the maximum of the wordsize and 2 +unsp:an unsigned integer with the size of a pointer +ptr:a pointer into data space +.TE +.DE +.LP The table below lists the i/o codes with their results and parameters. This list is similar to the system calls of the UNIX Version 7 operating system. -.A +.QQ To execute a monitor call, proceed as follows: -.IS 2 -.N 1 -.PS a 4 "" ) -.PT +.IP a) Stack the parameters, in reverse order, last parameter first. -.PT +.IP b) Push the monitor call number (iocode) onto the stack. -.PT +.IP c) Execute the MON instruction. -.PE 1 -.IE +.LP An error code is present on the top of the stack after execution of most monitor calls. If this error code is zero, the call performed the action @@ -117,9 +94,12 @@ This construction enables programs to test for failure with a single instruction (~TEQ or TNE~) and still find out the cause of the failure. The result name 'e' is reserved for the error code. -.N 1 +.ne 5 +.LP List of monitor calls. -.DS B +.LP +.nf +.na .ta 4n 13n 29n 52n nr name parameters results function @@ -191,22 +171,23 @@ nr name parameters results function e:int Execute a file 60 Umask mask:int2 oldmask:int2 Set file creation mode mask 61 Chroot string:ptr e:int Change root directory -.DE 1 +.fi +.ad +.LP Codes 0, 11, 13, 17, 31, 32, 38, 39, 40, 45, 49, 50, 52, 55, 57, 58, 62, and 63 are not used. -.P +.PP All monitor calls, except fork and sigtrp are the same as the UNIX version 7 system calls. -.P +.PP The sigtrp entry maps UNIX signals onto EM interrupts. Normally, trapno is in the range 0 to 252. In that case it requests that signal signo will cause trap trapno to occur. When given trap number \-2, default signal handling is reset, and when given trap number \-3, the signal is ignored. -.P +.PP The flag returned by fork is 1 in the child process and 0 in the parent. The pid returned is the process-id of the other process. -.VS diff --git a/doc/em/intro.nr b/doc/em/intro.nr index bef9f38ff..7f7c711a0 100644 --- a/doc/em/intro.nr +++ b/doc/em/intro.nr @@ -1,48 +1,42 @@ -.BP -.S1 "INTRODUCTION" +.bp +.P1 "INTRODUCTION" +.PP EM is a family of intermediate languages designed for producing portable compilers. -The general strategy is for a program called -.B front end +The general strategy is for a program called \fBfront end\fP to translate the source program to EM. -Another program, -.B back -.BW end +Another program, \fBback end\fP, translates EM to target assembly language. Alternatively, the EM code can be assembled to a binary form and interpreted. These considerations led to the following goals: -.IS 2 10 -.PS 1 4 -.PT +.IP 1 The design should allow translation to, or interpretation on, a wide range of existing machines. Design decisions should be delayed as far as possible and the implications of these decisions should be localized as much as possible. -.N +.br The current microcomputer technology offers 8, 16 and 32 bit machines with various sizes of address space. EM should be flexible enough to be useful on most of these machines. The differences between the members of the EM family should only concern the wordsize and address space size. -.PT +.IP 2 The architecture should ease the task of code generation for high level languages such as Pascal, C, Ada, Algol 68, BCPL. -.PT +.IP 3 The instruction set used by the interpreter should be compact, to reduce the amount of memory needed for program storage, and to reduce the time needed to transmit programs over communication lines. -.PT +.IP 3 It should be designed with microprogrammed implementations in mind; in particular, the use of many short fields within instruction opcodes should be avoided, because their extraction by the microprogram or conversion to other instruction formats is inefficient. -.PE -.IE -.A +.PP The basic architecture is based on the concept of a stack. The stack is used for procedure return addresses, actual parameters, local variables, and arithmetic operations. @@ -61,7 +55,7 @@ stack. For all types except pointers, these instructions have the object size as argument. -.P +.PP There are no visible general registers used for arithmetic operands etc. This is in contrast to most third generation computers, which usually have 8 or 16 general registers. The decision not to have a group of @@ -69,11 +63,11 @@ general registers was fully intentional, and follows W.L. Van der Poel's dictum that a machine should have 0, 1, or an infinite number of any feature. General registers have two primary uses: to hold intermediate results of complicated expressions, e.g. -.IS 5 0 1 +.DS ((a*b + c*d)/e + f*g/h) * i -.IE 1 +.DE and to hold local variables. -.P +.PP Various studies have shown that the average expression has fewer than two operands, making the former use of registers of doubtful value. The present trend @@ -81,11 +75,9 @@ toward structured programs consisting of many small procedures greatly reduces the value of registers to hold local variables because the large number of procedure calls implies a large overhead in saving and restoring the registers at every call. -.P +.PP Although there are no general purpose registers, there are a few internal registers with specific functions as follows: -.IS 2 -.N 1 .TS tab(:); l 1 l l l. @@ -94,9 +86,8 @@ LB:\-:Local Base:Points to base of the local variables :::in the current procedure. SP:\-:Stack Pointer:Points to the highest occupied word on the stack. HP:\-:Heap Pointer:Points to the top of the heap area. -.TE 1 -.IE -.A +.TE +.PP Furthermore, reverse Polish code is much easier to generate than multi-register machine code, especially if highly efficient code is desired. @@ -106,7 +97,7 @@ An EM machine can achieve high performance by keeping part of the stack in high speed storage (a cache or microprogram scratchpad memory) rather than in primary memory. -.P +.PP Again according to van der Poel's dictum, all EM instructions have zero or one argument. We believe that instructions needing two arguments @@ -116,11 +107,11 @@ circumstances as well. Moreover, these two instructions together often have a shorter encoding than the single instruction before. -.P +.PP This document describes EM at three different levels: the abstract level, the assembly language level and the machine language level. -.A +.QQ The most important level is that of the abstract EM architecture. This level deals with the basic design issues. Only the functional capabilities of instructions are relevant, not their @@ -128,14 +119,14 @@ format or encoding. Most chapters of this document refer to the abstract level and it is explicitly stated whenever another level is described. -.A +.QQ The assembly language is intended for the compiler writer. It presents a more or less orthogonal instruction set and provides symbolic names for data. Moreover, it facilitates the linking of separately compiled 'modules' into a single program by providing several pseudoinstructions. -.A +.QQ The machine language is designed for interpretation with a compact program text and easy decoding. The binary representation of the machine language instruction set is @@ -144,7 +135,7 @@ Frequent instructions have a short opcode. The encoding is fully byte oriented. These bytes do not contain small bit fields, because bit fields would slow down decoding considerably. -.P +.PP A common use for EM is for producing portable (cross) compilers. When used this way, the compilers produce EM assembly language as their output. @@ -156,7 +147,7 @@ machine language instructions is irrelevant. On the other hand, when writing an interpreter for EM machine language programs, the interpreter must deal with the machine language and not with the symbolic assembly language. -.P +.PP As mentioned above, the current microcomputer technology offers 8, 16 and 32 bit machines with address spaces ranging from diff --git a/doc/em/ispace.nr b/doc/em/ispace.nr index a2c592463..db1c71fb2 100644 --- a/doc/em/ispace.nr +++ b/doc/em/ispace.nr @@ -1,6 +1,5 @@ -.SN 3 -.BP -.S1 "INSTRUCTION ADDRESS SPACE" +.bp +.P1 "INSTRUCTION ADDRESS SPACE" The instruction space of the EM machine contains the code for procedures. Tables necessary for the execution of this code, for example, procedure @@ -10,14 +9,14 @@ the execution of a program, so that it may be protected. No further restrictions to the instruction address space are necessary for the abstract and assembly language level. -.P +.PP Each procedure has a single entry point: the first instruction. A special type of pointer identifies a procedure. Pointers into the instruction address space have the same size as pointers into data space and can, for example, contain the address of the first instruction or an index in a procedure descriptor table. -.A +.QQ There is a single EM program counter, PC, pointing to the next instruction to be executed. The procedure pointed to by PC is @@ -28,35 +27,31 @@ The calling procedure remains 'active' and is resumed whenever the called procedure returns. Note that a procedure has several 'active' invocations when called recursively. -.P +.PP Each procedure must return properly. It is not allowed to fall through to the code of the next procedure. There are several ways to exit from a procedure: -.IS 3 -.PS -.PT +.IP - the RET instruction, which returns to the calling procedure. -.PT +.IP - the RTT instruction, which exits a trap handling routine and resumes the trapping instruction (see next chapter). -.PT +.IP - the GTO instruction, which is used for non-local goto's. It can remove several frames from the stack and transfer control to an active procedure. (see also MES~11 in paragraph 11.1.4.4) -.PE -.IE -.P +.PP All branch instructions can transfer control to any label within the same procedure. Branch instructions can never jump out of a procedure. -.P +.PP Several language implementations use a so called procedure instance identifier, a combination of a procedure identifier and the LB of a stack frame, also called static link. -.P +.PP The program text for each procedure, as well as any tables, are fragments and can be allocated anywhere in the instruction address space. diff --git a/doc/em/mach.nr b/doc/em/mach.nr index f64383f8e..2f82202d6 100644 --- a/doc/em/mach.nr +++ b/doc/em/mach.nr @@ -1,6 +1,6 @@ -.BP -.SN 10 -.S1 "EM MACHINE LANGUAGE" +.bp +.P1 "EM MACHINE LANGUAGE" +.PP The EM machine language is designed to make program text compact and to make decoding easy. Compact program text has many advantages: programs execute faster, @@ -11,16 +11,18 @@ that it is feasible to use interpreters as long as EM hardware machines are not available. This chapter is irrelevant when back ends are used to produce executable target machine code. -.S2 "Instruction encoding" +.P2 "Instruction encoding" +.PP A design goal of EM is to make the program text as compact as possible. Decoding must be easy, however. The encoding is fully byte oriented, without any small bit fields. There are 256 primary opcodes, two of which are an escape to two groups of 256 secondary opcodes each. -.A +.QQ EM instructions without arguments have a single opcode assigned, possibly escaped: +.ta 12n 24n .Dr 6 |--------------| | opcode | @@ -37,7 +39,7 @@ Several instructions have an address from the global data area as argument. Other instructions have different opcodes for positive and negative arguments. -.N 1 +.LP There is always an opcode that takes the next two bytes as argument, high byte first: .Dr 6 @@ -94,7 +96,7 @@ several different encodings are available. It is the task of the assembler to select the shortest of these. The savings by these mini and shortie opcodes are considerable, about 55%. -.P +.PP Further improvements are possible: the arguments of many instructions are a multiple of the wordsize. @@ -106,26 +108,24 @@ The arguments of some other instructions rarely or never assume the value 0, but start at 1. The value 1 is then encoded as 0, 2 as 1 and so on. -.P +.PP Assigning opcodes to instructions by the assembler is completely table driven. For details see appendix B. -.S2 "Procedure descriptors" +.P2 "Procedure descriptors" +.PP The procedure identifiers used in the interpreter are indices into a table of procedure descriptors. Each descriptor contains: -.IS 6 -.PS - 4 -.PT 1. +.IP 1. the number of bytes to be reserved for locals at each invocation. -.N +.br This is a pointer-sized integer. -.PT 2. +.IP 2. the start address of the procedure -.PE -.IE -.S2 "Load format" +.P2 "Load format" +.PP The EM machine language load format defines the interface between the EM assembler/loader and the EM machine itself. A load file consists of a header, the program text to be executed, @@ -133,7 +133,7 @@ a description of the global data area and the procedure descriptor table, in this order. All integers in the load file are presented with the least significant byte first. -.P +.PP The header has two parts: the first half (eight 16-bit integers) aids in selecting the correct EM machine or interpreter. @@ -141,68 +141,59 @@ Some EM machines, for instance, may have hardware floating point instructions. .N The header entries are as follows (bit 0 is rightmost): -.IS 2 -.VS 1 0 -.PS 1 4 "" : -.PT +.IP 1: magic number (07255) -.PT +.IP 2: flag bits with the following meaning: -.PS - 7 "" : -.PT bit 0 +.RS +.IP "bit 0" TEST; test for integer overflow etc. -.PT bit 1 +.IP "bit 1" PROFILE; for each source line: count the number of memory cycles executed. -.PT bit 2 +.IP "bit 2" FLOW; for each source line: set a bit in a bit map table if instructions on that line are executed. -.PT bit 3 +.IP "bit 3" COUNT; for each source line: increment a counter if that line is entered. -.PT bit 4 +.IP "bit 4" REALS; set if a program uses floating point instructions. -.PT bit 5 +.IP "bit 5" EXTRA; more tests during compiler debugging. -.PE -.PT +.RE +.IP 3: number of unresolved references. -.PT +.IP 4: version number; used to detect obsolete EM load files. -.PT +.IP 5: wordsize ; the number of bytes in each machine word. -.PT +.IP 6: pointer size ; the number of bytes available for addressing. -.PT +.IP 7: unused -.PT +.IP 8: unused -.PE -.IE +.LP The second part of the header (eight entries, of pointer size bytes each) describes the load file itself: -.IS 2 -.PS 1 4 "" : -.PT +.IP 1: NTEXT; the program text size in bytes. -.PT +.IP 2: NDATA; the number of load-file descriptors (see below). -.PT +.IP 3: NPROC; the number of entries in the procedure descriptor table. -.PT +.IP 4: ENTRY; procedure number of the procedure to start with. -.PT +.IP 5: NLINE; the maximum source line number. -.PT +.IP 6: SZDATA; the address of the lowest uninitialized data byte. -.PT +.IP 7: unused -.PT +.IP 8: unused -.PE -.IE -.VS -.P +.PP The program text consists of NTEXT bytes. NTEXT is always a multiple of the wordsize. The first byte of the program text is the @@ -212,7 +203,7 @@ Pointers into the program text are found in the procedure descriptor table where relocation is simple and in the global data area. The initialization of the global data area allows easy relocation of pointers into both address spaces. -.P +.PP The global data area is described by the NDATA descriptors. Each descriptor describes a number of consecutive words (of~wordsize) and consists of a sequence of bytes. @@ -220,7 +211,7 @@ While reading the descriptors from the load file, one can initialize the global data area from low to high addresses. The size of the initialized data area is given by SZDATA, this number can be used to check the initialization. -.N +.br The header of each descriptor consists of a byte, describing the type, and a count. The number of bytes used for this (unsigned) count depends on the @@ -232,31 +223,22 @@ At load time an interpreter can perform any conversion deemed necessary, such as reordering bytes in integers and pointers and adding base addresses to pointers. -.A +.QQ In the following pictures we show a graphical notation of the initializers. The leftmost rectangle represents the leading byte. -.N 1 -.VS 1 0 -.DS -.PS - 4 " " +.LP Fields marked with -.N 1 -.PT n -contain a pointer-sized integer used as a count -.PT m -contain a one-byte integer used as a count -.PT b -contain a one-byte integer -.PT w -contain a wordsized integer -.PT p -contain a data or instruction pointer -.PT s -contain a null terminated ASCII string -.PE 1 -.DE 0 -.VS +.TS +tab(:); +l l. +n:contain a pointer-sized integer used as a count +m:contain a one-byte integer used as a count +b:contain a one-byte integer +w:contain a wordsized integer +p:contain a data or instruction pointer +s:contain a null terminated ASCII string +.TE .Dr 6 ------------------- | 0 | n | repeat last initialization n times @@ -316,8 +298,7 @@ contain a null terminated ASCII string | 8 | m | s | initialized float of size m ------------------------- .De -.PS - 8 -.PT type~0: +.IP type~0: 10 If the last initialization initialized k bytes starting at address \fIa\fP, do the same initialization again n times, starting at \fIa\fP+k, \fIa\fP+2*k, .... \fIa\fP+n*k. @@ -328,43 +309,43 @@ pointer, in all other descriptors the first byte is followed by a one-byte count. This descriptor must be preceded by a descriptor of another type. -.PT type~1: +.IP type~1: 10 Reserve m words, not explicitly initialized (BSS and HOL). -.PT type~2: +.IP type~2: 10 The m bytes following the descriptor header are initializers for the next m bytes of the global data area. m is divisible by the wordsize. -.PT type~3: +.IP type~3: 10 The m words following the header are initializers for the next m words of the global data area. -.PT type~4: +.IP type~4: 10 The m data address space pointers following the header are initializers for the next m data pointers in the global data area. Interpreters that represent EM pointers by target machine addresses must relocate all data pointers. -.PT type~5: +.IP type~5: 10 The m instruction address space pointers following the header are initializers for the next m instruction pointers in the global data area. Interpreters that represent EM instruction pointers by target machine addresses must relocate these pointers. -.PT type~6: +.IP type~6: 10 The m bytes following the header form a signed integer number with a size of m bytes, which is an initializer for the next m bytes of the global data area. m is governed by the same restrictions as for transfer of objects to/from memory. -.PT type~7: +.IP type~7: 10 The m bytes following the header form an unsigned integer number with a size of m bytes, which is an initializer for the next m bytes of the global data area. m is governed by the same restrictions as for transfer of objects to/from memory. -.PT type~8: +.IP type~8: 10 The header is followed by an ASCII string, null terminated, to initialize, in global data, a floating point number with a size of m bytes. @@ -372,8 +353,7 @@ m is governed by the same restrictions as for transfer of objects to/from memory. The ASCII string contains the notation of a real as used in the Pascal language. -.PE -.P +.PP The NPROC procedure descriptors on the load file consist of an instruction space address (of~pointer~size) and an integer (of~pointer~size) specifying the number of bytes for diff --git a/doc/em/macr.nr b/doc/em/macr.nr index 3790cac6d..f13e8e124 100644 --- a/doc/em/macr.nr +++ b/doc/em/macr.nr @@ -1,39 +1,113 @@ -.SS 10 -.if n .LL 78 -.RP -.MS T E -\!.TL '%''' -.ME -.MS T O -\!.TL '''%' -.ME -.MS B -.sp 1 -.ME -.SM S1 B -.SM S2 B +.LP +.if n \{\ +.nr LL 78 +.ll 78 \} +.tr ~ .\" below are three simple macros to get the drawings right .\" added by Dick Grune .de Dr \" Drawing $1 (size) -.N 1 -.NE \\$1 -.NA +.sp 1 +.ne \\$1 +.na .ft CW \" constant spacing .lg 0 \" no ligatures .. .de Df \" Drawing Footer -.N 1 +.br +.sp 1 .ft R -.CS +.ce 1000 .lg 1 .. .de De \" Drawing End $1 (lines) -.Df \" if it hasn't happened yet -.CE -.AD -.N \\$1 +.br +.ft R +.lg 1 +.ce 0 +.ad +.sp \\$1 .. .\" macro for exponents, added by Ceriel Jacobs .de Ex \" Exponent $1 $2 [$3] \\$1\v'-0.5m'\s-2\\$2\s+2\v'0.5m'\\$3 .. +.\" QQ is like PP, but without space +. \" use .PP, with PD 0. +.de QQ +.nr xx \\n(PD +.nr PD 0 +.PP +.nr PD \\n(xx +.. +.nr N1 0 +.nr N2 0 +.nr N3 0 +.nr N4 0 +.nr N5 0 +.nr A5 0 +.af A5 A +.de P1 +.nr N2 0 +.nr N1 \\n(N1+1 +.ds Tl "\\n(N1. \\$1 +.Ca 0 +.sp +.LP +\\fB\\n(N1. \\$1\\fP +.sp +.. +.de P2 +.nr N3 0 +.nr N2 \\n(N2+1 +.ds Tl "\\n(N1.\\n(N2 \\$1 +.ne 5 +.Ca 2 +.sp +.LP +\\fB\\n(N1.\\n(N2 \\$1\fP +.. +.de P3 +.nr N4 0 +.nr N3 \\n(N3+1 +.ds Tl "\\n(N1.\\n(N2.\\n(N3 \\$1 +.Ca 4 +.LP +\\fI\\n(N1.\\n(N2.\\n(N3 \\$1\fP +.. +.de P4 +.nr N4 \\n(N4+1 +.ds Tl "\\n(N1.\\n(N2.\\n(N3.\\n(N4 \\$1 +.ne 5 +.Ca 6 +.LP +\\fI\\n(N1.\\n(N2.\\n(N3.\\n(N4 \\$1\fP +.. +.de AP +.nr N5 \\n(N5+1 +.nr A5 \\n(N5 +.ds Tl "\\n(A5. \\$1 +.ne 5 +.Ca 0 +.LP +\\fB\\n(A5. \\$1\\fP +.sp +.. +.de Ca +.da Cc +.if \\$1=0 \!.sp \\\\n(PDu +\!\l\&\\$1n\ \&\\*(Tl \l\&|\\\\n(LLu-\w\&\ \\n(PN\&u.\&\ \\n(PN +\!.br +.da +.. +.de Ct +.Cc +.rm Cc +.. +.de PT +.lt \\n(LLu +.pc % +.nr PN \\n%-1 +.if \\n(PN%2=1 .tl '''\\n(PN' +.if (\\n(PN%2=0)&(\\n(PN) .tl '\\n(PN''' +.lt \\n(.lu +.. diff --git a/doc/em/mapping.nr b/doc/em/mapping.nr index ded71660c..22a75c8a3 100644 --- a/doc/em/mapping.nr +++ b/doc/em/mapping.nr @@ -1,12 +1,12 @@ -.SN 5 -.BP -.S1 "MAPPING OF EM DATA MEMORY ONTO TARGET MACHINE MEMORY" +.bp +.P1 "MAPPING OF EM DATA MEMORY ONTO TARGET MACHINE MEMORY" +.PP The EM architecture is designed to be implemented on many existing and future machines. EM memory is highly fragmented to make adaptation to various memory architectures possible. Format and encoding of pointers is explicitly undefined. -.P +.PP This chapter gives solutions to some of the anticipated problems. First, we describe a possible memory layout for machines @@ -53,11 +53,9 @@ The most straightforward layout is shown in figure 2. Figure 2. Memory layout showing typical register positions during execution of an EM program. .De -.N 1 +.sp 1 The base registers for the various memory pieces can be stored in target machine registers or memory. -.IS -.N 1 .TS tab(;); l 1 l l l. @@ -65,8 +63,8 @@ PB;:;program base;points to the base of the instruction address space. EB;:;external base;points to the base of the data address space. HB;:;heap base;points to the base of the heap area. ML;:;memory limit;marks the high end of the addressable data space. -.TE 1 -.IE +.TE +.LP The stack grows from high EM addresses to low EM addresses, and the heap the other way. @@ -74,7 +72,7 @@ The memory between SP and HP is not accessible, but may be allocated later to the stack or the heap if needed. The local data area is allocated starting at the high end of memory. -.P +.PP Because EM address 0 is not mapped onto target address 0, a problem arises when pointers are used. If a program pushed a constant, say 6, onto the stack, @@ -86,7 +84,7 @@ This particular problem is solved by explicitly declaring the format of a pointer to be undefined, so that using a constant as a pointer is completely illegal. However, the general problem of mapping pointers still exists. -.P +.PP There are two possible solutions. In the first solution, EM pointers are represented in the target machine as true EM addresses, @@ -100,7 +98,7 @@ facilities, EB can be kept in a target machine register, and the relocation can indeed be done on every reference to the data address space at a modest cost in speed. -.P +.PP The other solution consists of having EM pointers refer to the true target machine address. Thus the instruction LAE 6 (Load Address of External 6) @@ -112,7 +110,7 @@ However, the problem is not completely solved, because a front end may have to initialize a pointer in CON or ROM data to point to a global address. This pointer must also be relocated by the back end or the interpreter. -.P +.PP Although the EM stack grows from high to low EM addresses, some machines have hardware PUSH and POP instructions that require the stack to grow upwards. @@ -144,17 +142,13 @@ Figure 3. Two possible memory implementations. Numbers within the boxes are EM addresses. The other numbers are physical addresses. .De -.A 1 0 +.LP So, we have two different EM memory implementations: -.IS -.PS - 4 -.PT A~\- +.IP "A~\-" stack downwards -.PT B~\- +.IP "B~\-" stack upwards -.PE -.IE -.P +.PP For each of these two possibilities we give the translation of the EM instructions to push the third byte of a global data block starting at EM address 40 onto the stack and to load the @@ -164,22 +158,20 @@ The target machine used is a PDP-11 augmented with push and pop instructions. Registers 'r0' and 'r1' are used and suffer from sign extension for byte transfers. Push $40 means push the constant 40, not word 40. -.P +.PP The translation of the EM instructions depends on the pointer representation used. For each of the two solutions explained above the translation is given. -.P +.PP First, the translation for the two implementations using EM addresses as pointer representation: -.DS +.KS .TS tab(:), center; l s l s l s -_ s _ s _ s l 2 l 6 l 2 l 6 l 2 l. EM:type A:type B - - +_ LAE:40:push:$40:push:$40 ADP:3:pop:r0:pop:r0 @@ -194,20 +186,17 @@ LOI:1:pop:r0:pop:r0 LOE:40:push:eb+40:push:eb-41 .TE -.DE -.P +.KE +.PP The translation for the two implementations, if the target machine address is used as pointer representation, is: -.N 1 -.DS +.KS .TS tab(:), center; l s l s l s -_ s _ s _ s l 2 l 6 l 2 l 6 l 2 l. EM:type A:type B - - +_ LAE:40:push:$eb+40:push:$eb-40 ADP:3:pop:r0:pop:r0 @@ -221,12 +210,12 @@ LOI:1:pop:r0:pop:r0 LOE:40:push:eb+40:push:eb-41 .TE -.DE -.P +.KE +.PP The translation presented above is not intended to be optimal. Most machines can handle these simple cases in one or two instructions. It demonstrates, however, the flexibility of the EM design. -.P +.PP There are several possibilities to implement EM on machines with address spaces larger than 64k bytes. For EM with two byte pointers one could allocate instruction and @@ -236,7 +225,7 @@ but the base registers PB and EB may be loaded in hardware registers wider than 16 bits, if available. EM implementations can also make efficient use of a machine with separate instruction and data space. -.P +.PP EM with 32 bit pointers allows one to make use of machines with large address spaces. In a virtual, segmented memory system one could use a separate diff --git a/doc/em/mem.nr b/doc/em/mem.nr index c6ca14dc9..ee1364ff6 100644 --- a/doc/em/mem.nr +++ b/doc/em/mem.nr @@ -1,13 +1,13 @@ -.BP -.SN 2 -.S1 MEMORY +.bp +.P1 MEMORY +.PP The EM machine has two distinct address spaces, one for instructions and one for data. The data space is divided up into 8-bit bytes. The smallest addressable unit is a byte. Bytes are numbered consecutively from 0 to some maximum. All sizes in EM are expressed in bytes. -.P +.PP Some EM instructions can transfer objects containing several bytes to and/or from memory. The size of all objects larger than a word must be a multiple of @@ -26,7 +26,7 @@ location \fIm\fP and the wordsize is 2, \fIm\fP must be a multiple of 2 and the bytes at locations \fIm\fP, \fIm\fP\|+\|1,\fIm\fP\|+\|2 and \fIm\fP\|+\|3 are overwritten. -.P +.PP The size of almost all objects in EM is an integral number of words. Only two operations are allowed on @@ -42,11 +42,11 @@ EM provides a way to sign-extend a small integer. Popping a small object from the stack removes a word from the stack, stores the least significant byte(s) of this word in memory and discards the rest of the word. -.P +.PP The format of pointers into both address spaces is explicitly undefined. The size of a pointer, however, is fixed for a member of EM, so that the compiler writer knows how much storage to allocate for a pointer. -.P +.PP A minor problem is raised by the undefined pointer format. Some languages, notably Pascal, require a special, otherwise illegal, pointer value to represent the nil pointer. @@ -59,12 +59,12 @@ but it is hard to imagine an implementation for which the current solution is inadequate, especially because the first word in the EM data space is special and probably not the target of any pointer. -.P +.PP The next two chapters describe the EM memory in more detail. One describes the instruction address space, the other the data address space. -.P +.PP A design goal of EM has been to allow its implementation on a wide range of existing machines, as well as allowing a new one to be built in hardware. diff --git a/doc/em/title.nr b/doc/em/title.nr index 653b009cf..a31051041 100644 --- a/doc/em/title.nr +++ b/doc/em/title.nr @@ -1,6 +1,4 @@ -.po 0 -.TP 1 -.ll 79n +.LP \& .sp 10 .ce 4 @@ -25,12 +23,9 @@ Abstract .ti +5 EM is a family of intermediate languages designed for producing portable compilers. -A program called -.B front end +A program called \fBfront end\fP translates source programs to EM. -Another program, -.B back -.BW end , +Another program, \fBback end\fP, translates EM to the assembly language of the target machine. Alternatively, the EM program can be assembled to a highly efficient binary format for interpretation. diff --git a/doc/em/traps.nr b/doc/em/traps.nr index 61243f758..13c8db6f8 100644 --- a/doc/em/traps.nr +++ b/doc/em/traps.nr @@ -1,13 +1,12 @@ -.SN 9 -.VS 1 0 -.BP -.S1 "TRAPS AND INTERRUPTS" +.bp +.P1 "TRAPS AND INTERRUPTS" +.PP EM provides a means for the user program to catch all traps generated by the program itself, the hardware, or external conditions. This mechanism uses five instructions: LIM, SIM, SIG, TRP and RTT. This section of the manual may be omitted on the first reading since it presupposes knowledge of the EM instruction set. -.P +.PP The action taken when a trap occurs is determined by the value of an internal EM trap register. This register contains a pointer to a procedure. @@ -26,7 +25,7 @@ Two consecutive SIGs are a no-op. When a trap occurs, the trap register is reset to its initial condition, to prevent recursive traps from hanging the machine up, e.g. stack overflow in the stack overflow handling procedure. -.P +.PP The runtime systems for some languages need to ignore some EM traps. EM offers a feature called the ignore mask. @@ -37,24 +36,24 @@ If a certain bit is 1 the corresponding trap never occurs and processing simply continues. The actions performed by the offending instruction are described by the Pascal program in appendix A. -.N +.br If the bit is 0, traps are not ignored. The instructions LIM and SIM allow copying and replacement of the ignore mask.~ -.P +.PP The TRP instruction generates a trap, the trap number being found on the stack. This is, among other things, useful for library procedures and runtime systems. It can also be used by a low level trap procedure to pass the trap to a higher level one (see example below). -.P +.PP The RTT instruction returns from the trap procedure and continues after the trap. In the list below all traps marked with an asterisk ('*') are considered to be fatal and it is explicitly undefined what happens when restarting after the trap. -.P +.PP The way a trap procedure is called is completely compatible with normal calling conventions. The only way a trap procedure differs from normal procedures is the return. It has to use RTT instead @@ -62,25 +61,20 @@ of RET. This is necessary because the complete runtime status is saved on the stack before calling the procedure and all this status has to be reloaded. Error numbers are in the range 0 to 252. The trap numbers are divided into three categories: -.IS 4 -.N 1 -.PS - 10 -.PT ~~0\-~63 +.IP "\0\00\-\063" 12 EM machine errors, e.g. illegal instruction. -.PS - 8 -.PT ~0\-15 +.RS +.IP "\00\-15" 8 maskable -.PT 16\-63 +.IP "16\-63" 8 not maskable -.PE -.PT ~64\-127 +.RE +.IP "\064\-127" 12 Reserved for use by compilers, run time systems, etc. -.PT 128\-252 +.IP "128\-252" 12 Available for user programs. -.PE 1 -.IE +.LP EM machine errors are numbered as follows: -.DS I 5 .TS tab(@); n l l. @@ -108,15 +102,16 @@ n l l. 26@EBADLIN@Argument of LIN too high 27@EBADGTO@GTO descriptor error .TE -.DE 0 -.P +.PP As an example, suppose a subprocedure has to be written to do a numeric calculation. When an overflow occurs the computation has to be stopped and the higher level procedure must be resumed. This can be programmed as follows using the mechanism described above: -.DS B +.LP +.KS +.nf .ta 1n 24n mes 2,2,2 ; set sizes ersave @@ -150,10 +145,12 @@ msave jmpbuf con *1,0,0 end -.DE 0 -.VS -.DS +.KE +.KS +.LP Example of catch procedure +.LP +.nf .ta 1n 24n pro $catch,0 ; Local procedure that must catch the overflow trap lol 2 ; Load trap number @@ -168,4 +165,5 @@ Example of catch procedure trp ; call other trap procedure rtt ; if other procedure returns, do the same end -.DE +.KE +.fi diff --git a/doc/em/types.nr b/doc/em/types.nr index 5e0ff15bd..12f6a5b13 100644 --- a/doc/em/types.nr +++ b/doc/em/types.nr @@ -1,6 +1,6 @@ -.SN 6 -.BP -.S1 "TYPE REPRESENTATIONS" +.bp +.P1 "TYPE REPRESENTATIONS" +.PP The representations used for typed objects are not precisely specified by EM. Sometimes we only specify that a typed object occupies a @@ -15,7 +15,7 @@ on the same object(s). For example, the instruction ZER pushes signed and unsigned integers with the value zero and empty sets. ZER has as only argument the size of the object. -.A +.QQ The representation of floating point numbers is a good example, it allows widely varying implementations. The only ways to create floating point numbers are via @@ -26,13 +26,14 @@ be converted to human readable output. Implementations may use base 10, base 2 or any other base for exponents, and have freedom in choosing the range of exponent and mantissa. -.A +.QQ Other types are more precisely described. In the following paragraphs a description will be given of the restrictions imposed on the representation of the types used. A number \fBn\fP used in these paragraphs indicates the size of the object in \fIbits\fP. -.S2 "Unsigned integers" +.P2 "Unsigned integers" +.PP The range of unsigned integers is 0.. .Ex 2 "\fBn\fP" -1. A binary representation is assumed. @@ -47,20 +48,21 @@ This of course means that some sequences of instructions have unpredictable effects. For example: .DS - LOC 258 ; STL 0 ; LAL 0 ; LOI 1 ( wordsize >=2 ) +LOC 258 ; STL 0 ; LAL 0 ; LOI 1 ( wordsize >=2 ) .DE The value on the stack after executing this sequence can be anything, but will most likely be 1 or 2. -.A +.QQ Conversion between unsigned integers of different sizes have to be done with explicit convert instructions. One cannot simply pad an unsigned integer with zero's at either end and expect a correct result. -.A +.QQ We assume existence of at least single word unsigned arithmetic in any implementation. -.S2 "Signed Integers" +.P2 "Signed Integers" +.PP The range of signed integers is .Ex \-2 "\fBn\fP\-1" ~.. .Ex 2 "\fBn\fP\-1" \-1, @@ -75,29 +77,31 @@ range In other words, the most significant bit is used as sign bit. The convert instructions between signed and unsigned integers of the same size can be used to catch errors. -.A +.QQ The value .Ex \-2 "\fBn\fP\-1" is used for undefined signed integers. EM implementations should trap when this value is used in an operation on signed integers. -The instruction mask, accessed with SIM and LIM \-~see chapter 9~\- , +The instruction mask, accessed with SIM and LIM \-~see chapter 9~\-, can be used to disable such traps. -.A +.QQ We assume existence of at least single word signed arithmetic in any implementation. -.S2 "Floating point values" +.P2 "Floating point values" +.PP Floating point values must have a signed mantissa and a signed exponent. Although no base is specified, base 2 is the normal choice, because the FEF instruction pushes the exponent in base 2. -.A +.QQ The implementation of floating point arithmetic is optional. The compilers currently in use have runtime parameters for the size of the floating point values they should use. Common choices are 4 and/or 8 bytes. -.S2 Pointers +.P2 Pointers +.PP EM has two kinds of pointers: for instruction and for data space. Each kind can only be used for its own space, conversion between @@ -109,13 +113,14 @@ One can of course not expect to be able to address two megabyte of memory using a 2-byte pointer. Normally, a 2-byte pointer allows up to 65536 bytes of addressable memory. -.A +.QQ Pointer representation has one restriction. The pointer with the same representation as the integer zero of the same size should be invalid. Some languages and/or runtime systems represent the nil pointer as zero. -.S2 "Bit sets" +.P2 "Bit sets" +.PP All bit sets of size \fBn\fP are subsets of the set {~i~|~i>=0,~i<\fBn\fP~}. A bit set contains a bit for each element showing its @@ -129,7 +134,7 @@ The relation between a set with size of a word and an unsigned integer word is that the value of the unsigned integer is the summation of the 2\v'-0.5m'i\v'0.5m' where i is in the set. -.A +.QQ Example: a 2-word bit set (wordsize 2) containing the elements 1, 6, 8, 15, 18, 21, 27 and 28 is composed of two integers, e.g. at addresses 40 and 42. -- 2.34.1