Alan Cox [Tue, 24 Jul 2018 23:15:25 +0000 (00:15 +0100)]
mkdir: fix size check
Tormod Volden [Mon, 23 Jul 2018 23:15:20 +0000 (01:15 +0200)]
init: Allow empty process field in inittab
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Tormod Volden [Mon, 23 Jul 2018 21:57:38 +0000 (23:57 +0200)]
dragon-nx32: Add virtual consoles (6847 text mode)
Copy and rename the common CONFIG_VT_SIMPLE code and use it with the
6847 text mode.
This gives us:
tty1 Graphic mode console at 0x0400
tty2 CRT9128
tty3 VC 0 text mode at 0x1c00
tty4 VC 1 text mode at 0x1e00
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Tormod Volden [Mon, 23 Jul 2018 21:57:37 +0000 (23:57 +0200)]
dragon-nx32: Reduce crt9128 screen size because of overscan
On most monitors the last columns and lines of the CRT9128 output
are not visible.
The sync parameters were mask programmable on the CRT9128 so there might
be exceptions but this seems a common issue with the standard parts
available.
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Tormod Volden [Mon, 23 Jul 2018 21:57:36 +0000 (23:57 +0200)]
dragon-nx32: Add dual-screen support with CRT9128
Adds CRT9128 card on tty2 with shared keyboard. Switch tty with
ctrl-1 and ctrl-2 (CLEAR-1 and CLEAR-2 on Dragon keyboard).
The 6847 graphics VT interface functions are made private and
these or the CRT9128 ones are called depending on the current TTY.
Add video.h just in case (not needed since multiplexer is asm).
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Tormod Volden [Mon, 23 Jul 2018 21:57:35 +0000 (23:57 +0200)]
crt9128: Add timeout in sync wait
And try reset the chip if there is a timeout.
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Tormod Volden [Mon, 23 Jul 2018 21:57:34 +0000 (23:57 +0200)]
crt9128: Rename VT interface functions to be private
So that they can be used in multi-head setups.
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Tormod Volden [Mon, 23 Jul 2018 21:57:33 +0000 (23:57 +0200)]
dragon-nx32: Remove unused VT macros in config.h
Previously used with CONFIG_VT_SIMPLE
VT_BASE remains in use in devtty.c
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Tormod Volden [Mon, 23 Jul 2018 21:48:32 +0000 (23:48 +0200)]
dragon-nx32: Make dwload support MOOH
It should remain compatible with the nx32 boards (Spinx-512).
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Tormod Volden [Mon, 23 Jul 2018 21:48:31 +0000 (23:48 +0200)]
dragon-nx32: Allow building MOOH variant (nx32 memory model)
This MOOH variant just groups the 8KB pages into 32KB banks so that it
can run as an nx32 system.
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Tormod Volden [Mon, 23 Jul 2018 21:40:28 +0000 (23:40 +0200)]
dragon-nx32: spi.s: Use macro defines for 65SPI flags
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Alan Cox [Tue, 24 Jul 2018 23:12:57 +0000 (00:12 +0100)]
Makefile.pdp11: add Makefile that was omitted
Alan Cox [Tue, 24 Jul 2018 23:12:39 +0000 (00:12 +0100)]
mkdir: documentation
Alan Cox [Sun, 22 Jul 2018 22:26:54 +0000 (23:26 +0100)]
pcw8256: fix defines for networking
Alan Cox [Sun, 22 Jul 2018 22:25:46 +0000 (23:25 +0100)]
font8x8; revert deconstification
We don't want sdcc making a huge initializer blob of it. Once we fix sdcc
we can sort this out. It might matter for other ports if so we may have to
ifdef it a bit
Alan Cox [Sun, 22 Jul 2018 15:55:17 +0000 (16:55 +0100)]
tzset: add draft support for shift time not just day
Alan Cox [Sun, 22 Jul 2018 14:16:38 +0000 (15:16 +0100)]
sys/super.h: properly expose the structure in user space form
Alan Cox [Sun, 22 Jul 2018 14:16:25 +0000 (15:16 +0100)]
tzset: continue working on daylight savings
Alan Cox [Sun, 22 Jul 2018 12:54:48 +0000 (13:54 +0100)]
tzset: first cut at a fullish parser
Alan Cox [Sat, 21 Jul 2018 23:37:44 +0000 (00:37 +0100)]
tzset: parse more format information
This now supports the most basic format.
Alan Cox [Sat, 21 Jul 2018 23:35:57 +0000 (00:35 +0100)]
libs: for now at least put a valid byte in isdst
Alan Cox [Sat, 21 Jul 2018 23:35:11 +0000 (00:35 +0100)]
date: rewrite and add manual page
We still need to support custom formats but that needs the fancy time format
stuff we don't yet have.
Alan Cox [Sat, 21 Jul 2018 20:55:14 +0000 (21:55 +0100)]
libc: add basical localtime support
We now pass the right things around to make this work.
At the moment the only format understood is zone+-shift in hours. So for example
TZ=BST+1.
Alan Cox [Sat, 21 Jul 2018 19:41:45 +0000 (20:41 +0100)]
localtim_r: do time zone changes
We had local/gmtime swapped
Alan Cox [Sat, 21 Jul 2018 19:41:06 +0000 (20:41 +0100)]
gmtime_r: is not localtime_r .. oops
Alan Cox [Sat, 21 Jul 2018 18:24:45 +0000 (19:24 +0100)]
mv/cp: Initial documentation
Alan Cox [Sat, 21 Jul 2018 18:10:26 +0000 (19:10 +0100)]
z80pack: createdrives is obsolete
Alan Cox [Sat, 21 Jul 2018 18:08:00 +0000 (19:08 +0100)]
mv: use a large copy buffer
Alan Cox [Sat, 21 Jul 2018 12:28:50 +0000 (13:28 +0100)]
DiskFormats: initial draft
Feedback welcome
Alan Cox [Sat, 21 Jul 2018 12:03:36 +0000 (13:03 +0100)]
nascom: Initial work in progress code (not complete)
These are the initial pieces to support the Lucas/Nascom 80-bus systems. There
is a lot to do before this is remotely useful.
Alan Cox [Sat, 21 Jul 2018 12:03:11 +0000 (13:03 +0100)]
trs80m1: note some things to review
Alan Cox [Sat, 21 Jul 2018 12:01:59 +0000 (13:01 +0100)]
devscsi: don't compile in unused data structures when not needed
EtchedPixels [Wed, 18 Jul 2018 17:37:05 +0000 (18:37 +0100)]
Merge pull request #646 from DBOTW/trslabel
tools: build trslabel
Jenz Guenther [Wed, 18 Jul 2018 16:49:45 +0000 (18:49 +0200)]
tools: build trslabel
EtchedPixels [Mon, 16 Jul 2018 22:56:08 +0000 (23:56 +0100)]
Merge pull request #645 from beretta42/typo
coco3: fix link script typo
Brett Gordon [Mon, 16 Jul 2018 14:20:11 +0000 (10:20 -0400)]
coco3: fix link script typo
Alan Cox [Sun, 15 Jul 2018 22:11:34 +0000 (23:11 +0100)]
apps: Additional 68K makefile entries
Alan Cox [Sun, 15 Jul 2018 22:02:37 +0000 (23:02 +0100)]
trs80: fix dumb bug when I added the input patch
Reported by Jenz Guenther
Alan Cox [Sun, 15 Jul 2018 00:16:21 +0000 (01:16 +0100)]
ls: Add a cleaned up slightly extended V7 ls for comparison
I don't think I like it or our current ls that much.
Alan Cox [Sun, 15 Jul 2018 00:16:13 +0000 (01:16 +0100)]
cp: use bigger buffers
Alan Cox [Sat, 14 Jul 2018 23:40:27 +0000 (00:40 +0100)]
process: small optimzations
Alan Cox [Sat, 14 Jul 2018 23:37:11 +0000 (00:37 +0100)]
kernel: dead code fix
Alan Cox [Sat, 14 Jul 2018 20:59:28 +0000 (21:59 +0100)]
cp: fix silence when given insufficient arguments
Alan Cox [Sat, 14 Jul 2018 20:56:22 +0000 (21:56 +0100)]
amstradnc: fix silly graphics bug
Alan Cox [Sat, 14 Jul 2018 20:51:17 +0000 (21:51 +0100)]
kernel: update version to 0.2rc1
We are now feature complete for my 0.2 target list on the kernel side
Alan Cox [Sat, 14 Jul 2018 20:50:03 +0000 (21:50 +0100)]
trs80m1: rearrange memory a bit and turn on networking
It all fits so why not.
Alan Cox [Sat, 14 Jul 2018 20:49:48 +0000 (21:49 +0100)]
trs80m1: add input meta handler
Alan Cox [Sat, 14 Jul 2018 20:49:29 +0000 (21:49 +0100)]
trs80: make the model 4 use the new handler
Alan Cox [Sat, 14 Jul 2018 20:49:04 +0000 (21:49 +0100)]
kernel: add the input meta handlers
Alan Cox [Sat, 14 Jul 2018 15:43:38 +0000 (16:43 +0100)]
tty: turn on the data_consumed event
Alan Cox [Sat, 14 Jul 2018 15:43:30 +0000 (16:43 +0100)]
trs80m1: further tty debug
Alan Cox [Sat, 14 Jul 2018 15:43:00 +0000 (16:43 +0100)]
tty: prototypes for the new helper
Alan Cox [Sat, 14 Jul 2018 15:42:33 +0000 (16:42 +0100)]
tty: expose re-enabled fullq() helper as the tty layer will need this
Alan Cox [Sat, 14 Jul 2018 15:42:04 +0000 (16:42 +0100)]
tty: add the new tty_data_consumed method
This is needed for flow control but does mean we need to add a null helper
everywhere.
Alan Cox [Sat, 14 Jul 2018 15:19:42 +0000 (16:19 +0100)]
trs80m1: add flow control and fix some other bugs
This relies on a pending core change that will get pushed soon but needs to
be propogated everywhere else first.
Alan Cox [Sat, 14 Jul 2018 14:48:17 +0000 (15:48 +0100)]
trs80m1: clean up devtty.c with indent etc
No code changes
Alan Cox [Sat, 14 Jul 2018 14:46:49 +0000 (15:46 +0100)]
trs80m1: video genie serial ports .. continued
Alan Cox [Sat, 14 Jul 2018 14:29:30 +0000 (15:29 +0100)]
libc: Tidy up use of __NaN
Now that SDCC only warns on divison by 0 we can put these back as they should
be so they also force any appropriate exception handling.
Alan Cox [Sat, 14 Jul 2018 14:13:58 +0000 (15:13 +0100)]
ps: add manual page
Alan Cox [Sat, 14 Jul 2018 13:44:27 +0000 (14:44 +0100)]
substroot: enable and use
Alan Cox [Sat, 14 Jul 2018 00:33:35 +0000 (01:33 +0100)]
Merge branch 'master' of https://github.com/EtchedPixels/FUZIX
Alan Cox [Sat, 14 Jul 2018 00:33:09 +0000 (01:33 +0100)]
ps: fix up option message
Alan Cox [Sat, 14 Jul 2018 00:32:49 +0000 (01:32 +0100)]
gfxtest: Lowe LE18 support
Alan Cox [Sat, 14 Jul 2018 00:32:30 +0000 (01:32 +0100)]
inittab: remove blank line
Alan Cox [Sat, 14 Jul 2018 00:31:58 +0000 (01:31 +0100)]
substroot: add a handy tool we'll use for boot scripts
Alan Cox [Sat, 14 Jul 2018 00:30:37 +0000 (01:30 +0100)]
trs80m1: remove double buffering from buffers, speed up user copies
Alan Cox [Fri, 13 Jul 2018 23:09:00 +0000 (00:09 +0100)]
trs80m1: make buffers.c a bit more readable
Depends on the tool chain fix
Alan Cox [Fri, 13 Jul 2018 23:07:51 +0000 (00:07 +0100)]
tools: record and process source/dest banks to fix data reloc bug
Before if we had something like
extern char foo[];
char *x = foo;
and foo was banked the fixup code would try and write a code stub mashing
x in the process. Now it treats data to data references as intentional.
Alan Cox [Fri, 13 Jul 2018 22:51:13 +0000 (23:51 +0100)]
tools: more banked section types
Alan Cox [Fri, 13 Jul 2018 22:49:23 +0000 (23:49 +0100)]
trs80m1: big set of somewhat intertwined updates
- Move the video genie serial to tty4 - you can after all have either type
on a VG system
- Add RTC support
- Dynamically sized external buffers
The buffer bouncing logic is still crap and as a result it sucks performance
wise but that's a follow up item.
Alan Cox [Fri, 13 Jul 2018 22:48:40 +0000 (23:48 +0100)]
trs80m1: remove dead debugging
Alan Cox [Fri, 13 Jul 2018 14:23:11 +0000 (15:23 +0100)]
kernel: don't declare array size of disk buffers in headers
Some platforms resize it later so it's misleading and we don't want someone
using sizeof() where they shouldn't
EtchedPixels [Fri, 13 Jul 2018 00:28:36 +0000 (01:28 +0100)]
Merge pull request #641 from piso77/fixes
Misc fixes
Alan Cox [Fri, 13 Jul 2018 00:26:35 +0000 (01:26 +0100)]
trs80m1: switch to separately banked buffers
This is a first cut. The buffers.c code needs rewriting.
Alan Cox [Fri, 13 Jul 2018 00:26:08 +0000 (01:26 +0100)]
trs80m1: update README
Alan Cox [Fri, 13 Jul 2018 00:24:53 +0000 (01:24 +0100)]
cpuinfo: first cut at a cpuinfo command
This one only does Z80 and needs some deubgging and testing before it's at
all reliable.
6502 NMOS/CMOS 65C816 and 6809/6309 are left as an exercise to the reader 8)
Paolo Pisati [Thu, 12 Jul 2018 17:42:45 +0000 (17:42 +0000)]
travis: hook multicomp09
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Paolo Pisati [Thu, 12 Jul 2018 17:03:53 +0000 (17:03 +0000)]
Applications/netd: Makefile.68000: fix typo
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Paolo Pisati [Thu, 12 Jul 2018 17:03:11 +0000 (17:03 +0000)]
Library/libs: fuzix-scc6809: rm autogenerated Makefile
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Paolo Pisati [Thu, 12 Jul 2018 17:02:52 +0000 (17:02 +0000)]
Library/libs: fuzixpdp11: rm autogenerated Makefile
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Paolo Pisati [Thu, 12 Jul 2018 17:01:43 +0000 (17:01 +0000)]
Library/libs: fuzix68000: rm autogenerated Makefile
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Alan Cox [Thu, 12 Jul 2018 14:09:58 +0000 (15:09 +0100)]
trs80m1: switch to external buffers
This is a minimal 'make it work' job.
Alan Cox [Thu, 12 Jul 2018 14:08:54 +0000 (15:08 +0100)]
trs80m1: Naïve initial implementation of external buffer support
This is just to make it work. We need custom buffer to user copiers (fast ones)
to make this work usefully.
Alan Cox [Thu, 12 Jul 2018 14:07:45 +0000 (15:07 +0100)]
kernel: final pieces needed (I think...) for external buffer support
Alan Cox [Wed, 11 Jul 2018 23:30:27 +0000 (00:30 +0100)]
syscall_exec16: note a cunning (but probably not very good) plan
Alan Cox [Wed, 11 Jul 2018 23:29:47 +0000 (00:29 +0100)]
trs80: update README
Alan Cox [Wed, 11 Jul 2018 23:29:25 +0000 (00:29 +0100)]
filesys: Fix build with external buffers
Alan Cox [Wed, 11 Jul 2018 22:22:12 +0000 (23:22 +0100)]
setdate: fix year in BCD mode
Alan Cox [Wed, 11 Jul 2018 22:21:40 +0000 (23:21 +0100)]
trs80m1: add clock code but ifdef it back out due to an SDCC bug
Filed as #2770 in SDCC bug tracker
EtchedPixels [Wed, 11 Jul 2018 16:34:01 +0000 (17:34 +0100)]
Merge pull request #640 from beretta42/ed
6809: compile ed in V7
Alan Cox [Wed, 11 Jul 2018 12:54:33 +0000 (13:54 +0100)]
trs80m1: devgfx, update comments
Alan Cox [Wed, 11 Jul 2018 12:53:59 +0000 (13:53 +0100)]
trs80m1: update README
Alan Cox [Wed, 11 Jul 2018 12:53:34 +0000 (13:53 +0100)]
netd: first cut at 68K build
Alan Cox [Wed, 11 Jul 2018 12:52:44 +0000 (13:52 +0100)]
Merge remote-tracking branch 'refs/remotes/origin/master'
Alan Cox [Wed, 11 Jul 2018 12:47:59 +0000 (13:47 +0100)]
trs80: Booting and banking work
1. Get rid of BANK94, make the new bank code the default as it works fine
without a 3rd party bank card
2. Generate "proper" TRS80 disk images. Our boot disk was 40 track DSSD
with sectors numbered from 0. A normal TRS80 disk numbers from 1.
3. Turn on disk skewing so the media layout is a bit more optimal
Brett Gordon [Wed, 11 Jul 2018 01:36:20 +0000 (21:36 -0400)]
6809: compile ed in V7
EtchedPixels [Tue, 10 Jul 2018 20:34:15 +0000 (21:34 +0100)]
Merge pull request #639 from piso77/v68_fixes
Resurrect the v68-banked target
Paolo Pisati [Tue, 10 Jul 2018 17:37:53 +0000 (19:37 +0200)]
travis: hook v68-banked
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Paolo Pisati [Tue, 10 Jul 2018 17:36:54 +0000 (19:36 +0200)]
v68-banked: config.h: devices.c invoke devide_init(), add CONFIG_IDE to fix build
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Paolo Pisati [Tue, 10 Jul 2018 17:29:37 +0000 (17:29 +0000)]
v68-banked: import missing fuzix.ld from v68
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>