ctsys
ctsetjmp
local.h
-makefile.std
+makefile
run
-Wed Apr 27 13:01:47 MET DST 1988
+Mon Nov 20 09:09:28 MET 1989
+Compilation command: acc -mem24 -DNOFLOAT
+Run command: em
***** ctconv
-em24 -DNOFLOAT conv.c
-conv.c
+compiling conv.c
"conv.c", line 38: (warning) overflow in constant expression
running conv.cem
comparing conv
2a3,4
> (float) 12 = 12.000000
> (int) 3.14 = 3
-11,$c13,$
+11,12c13,17
< char -1, int -1, unsigned 177777, long -1
< char -1, int -1, unsigned 177777, long -1
-< From integer
-< char -64, int -64, unsigned 177700, long -64
-< From long
-< char -3, int -3, unsigned 177775, long -3
-< Casts from long
-< char -8, int 9464, unsigned short 22370, long 75000
-< a[l] (l==3) -17
-< a[3l] -17
-< (unsigned short) 0x1f010L = 0xf010
-< (short) 0x1f010L = 0xfffff010
---
> float 127.000000
> char -1, int -1, unsigned 37777777777, long -1
> float -1.000000
> char -1, int -1, unsigned 37777777777, long -1
> float -1.000000
-> From integer
+14c19,20
+< char -64, int -64, unsigned 177700, long -64
+---
> char -64, int -64, unsigned 37777777700, long -64
> float -64.000000
-> From long
+16c22,23
+< char -3, int -3, unsigned 177775, long -3
+---
> char -3, int -3, unsigned 37777777775, long -3
> float -3.000000
-> Casts from long
+18c25,30
+< char -8, int 9464, unsigned short 22370, long 75000
+---
> char -8, int 75000, unsigned short 22370, long 75000
> From float
> char 121, int 121, unsigned 171, long 121, float 121.500000
> char 0, int 0, unsigned 0, long 0, float 0.000100
> int 32766, unsigned 77776, long 32766, float 32766.000000
> long 1223432064, float 1223432064.000000
-> a[l] (l==3) -17
-> a[3l] -17
-> (unsigned short) 0x1f010L = 0xf010
-> (short) 0x1f010L = 0xfffff010
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f conv.cem.g ; then diff conv.cem.r conv.cem.g ; else echo creating conv.cem.g ; cp conv.cem.r conv.cem.g ; fi
***** ctdecl
-em24 -DNOFLOAT decl.c
-decl.c
+compiling decl.c
running decl.cem
comparing decl
***** ctdivers
-em24 -DNOFLOAT ops.c
-ops.c
+compiling ops.c
running ops.cem
comparing ops
-22,37c22,39
-< u<<0 150715
+21a22
+> u>>16 0
+23,37c24,39
< u<<1 121632
< u<<2 43464
< u<<3 107150
< u<<14 40000
< u<<15 100000
---
-> u>>16 0
-> u<<0 150715
> u<<1 321632
> u<<2 643464
> u<<3 1507150
> u<<14 6434640000
> u<<15 15071500000
> u<<16 32163200000
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f ops.cem.g ; then diff ops.cem.r ops.cem.g ; else echo creating ops.cem.g ; cp ops.cem.r ops.cem.g ; fi
***** cterr
-em24 -DNOFLOAT bugs.c
-bugs.c
+compiling bugs.c
"bugs.c", line 88: (warning) overflow in constant expression
running bugs.cem
comparing bugs
***** ctest1
-em24 -DNOFLOAT test.c
-test.c
+compiling test.c
running test.cem
comparing test
-1,$c1,$
+1c1
< End of test program, 10 tests completed, 0 errors detected
---
> End of test program, 11 tests completed, 0 errors detected
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f test.cem.g ; then diff test.cem.r test.cem.g ; else echo creating test.cem.g ; cp test.cem.r test.cem.g ; fi
***** ctest2
-em24 -DNOFLOAT t7.c
-t7.c
+compiling t7.c
running t7.cem
comparing t7
***** ctest3
-em24 -DNOFLOAT test2.c
-test2.c
+compiling test2.c
"test2.c", line 448: (warning) conversion of pointer to int loses accuracy
"test2.c", line 448: (warning) conversion of pointer to int loses accuracy
running test2.cem
comparing test2
***** ctest5
-em24 -DNOFLOAT test1.c
-test1.c
+compiling test1.c
"test1.c", line 375: (warning) incompatible pointers in =
"test1.c", line 376: (warning) incompatible pointers in =
"test1.c", line 377: (warning) incompatible pointers in =
"test1.c", line 426: (warning) incompatible pointers in =
running test1.cem
comparing test1
-1,$c1,$
-< program test1
+0a1
+> error 13 in test 11
+2c3
< 10 tests completed. Number of errors = 0
---
-> error 13 in test 11
-> program test1
> 11 tests completed. Number of errors = 1
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f test1.cem.g ; then diff test1.cem.r test1.cem.g ; else echo creating test1.cem.g ; cp test1.cem.r test1.cem.g ; fi
***** ctgen
sed -f bf.sed <OPS >bf.c
-em24 -DNOFLOAT bf.c
-bf.c
+compiling bf.c
running bf.cem
comparing bf
+sed -f bfu.sed <OPS >bfu.c
+compiling bfu.c
+running bfu.cem
+comparing bfu
sed -f cel.sed <OPS >cel.c
-em24 -DNOFLOAT cel.c
-cel.c
+compiling cel.c
running cel.cem
comparing cel
sed -f clu.sed <OPS >clu.c
-em24 -DNOFLOAT clu.c
-clu.c
+compiling clu.c
"clu.c", line 60: (warning) overflow in unsigned constant expression
"clu.c", line 66: (warning) overflow in unsigned constant expression
running clu.cem
comparing clu
-23,31c23,31
+23,25c23,25
< x = 40000 -25536
< x += 40000 -25526
< x -= 40000 25546
-< x /= 40000 0
-< x %= 40000 10
-< x *= 40000 6784
-< x &= 40000 0
-< x |= 40000 -25526
-< x ^= 40000 -25526
---
> x = 40000 40000
> x += 40000 40010
> x -= 40000 -39990
-> x /= 40000 0
-> x %= 40000 10
+28c28
+< x *= 40000 6784
+---
> x *= 40000 400000
-> x &= 40000 0
+30,31c30,31
+< x |= 40000 -25526
+< x ^= 40000 -25526
+---
> x |= 40000 40010
> x ^= 40000 40010
38c38
< y = ( 40000 + 8012 ) -17524
---
> y = ( 40000 + 8012 ) 48012
-42,52c42,52
+42c42
< y = ( 40000 * 8012 ) 8960
-< y = ( 40000 & 8012 ) 7232
+---
+> y = ( 40000 * 8012 ) 320480000
+44,45c44,45
< y = ( 40000 | 8012 ) -24756
< y = ( 40000 ^ 8012 ) -31988
-< y = ( 40000 || 8012 ) 1
-< y = ( 40000 && 8012 ) 1
-< y = ( 40000 << 9 ) -32768
-< y = ( 40000 >> 9 ) 78
-< y = ( -40000 ) 25536
-< y = ( !40000 ) 0
-< y = ( ~40000 ) 25535
---
-> y = ( 40000 * 8012 ) 320480000
-> y = ( 40000 & 8012 ) 7232
> y = ( 40000 | 8012 ) 40780
> y = ( 40000 ^ 8012 ) 33548
-> y = ( 40000 || 8012 ) 1
-> y = ( 40000 && 8012 ) 1
+48c48
+< y = ( 40000 << 9 ) -32768
+---
> y = ( 40000 << 9 ) 20480000
-> y = ( 40000 >> 9 ) 78
+50c50
+< y = ( -40000 ) 25536
+---
> y = ( -40000 ) -40000
-> y = ( !40000 ) 0
+52c52
+< y = ( ~40000 ) 25535
+---
> y = ( ~40000 ) -40001
-59,68c59,68
+59,62c59,62
< y = ( 40000 ? 40000 : 8012 ) -25536
< y = ( x = 40000 ) -25536 -25536
< y = ( x += 40000 ) -25526 -25526
< y = ( x -= 40000 ) 25546 25546
-< y = ( x /= 40000 ) 0 0
-< y = ( x %= 40000 ) 10 10
-< y = ( x *= 40000 ) 6784 6784
-< y = ( x &= 40000 ) 0 0
-< y = ( x |= 40000 ) -25526 -25526
-< y = ( x ^= 40000 ) -25526 -25526
---
> y = ( 40000 ? 40000 : 8012 ) 40000
> y = ( x = 40000 ) 40000 40000
> y = ( x += 40000 ) 40010 40010
> y = ( x -= 40000 ) -39990 -39990
-> y = ( x /= 40000 ) 0 0
-> y = ( x %= 40000 ) 10 10
+65c65
+< y = ( x *= 40000 ) 6784 6784
+---
> y = ( x *= 40000 ) 400000 400000
-> y = ( x &= 40000 ) 0 0
+67,68c67,68
+< y = ( x |= 40000 ) -25526 -25526
+< y = ( x ^= 40000 ) -25526 -25526
+---
> y = ( x |= 40000 ) 40010 40010
> y = ( x ^= 40000 ) 40010 40010
-97,105c97,105
+97,99c97,99
< yes if ( x = 40000 ) yes() ; else no() -25536
< yes if ( x += 40000 ) yes() ; else no() -25526
< yes if ( x -= 40000 ) yes() ; else no() 25546
-< no if ( x /= 40000 ) yes() ; else no() 0
-< yes if ( x %= 40000 ) yes() ; else no() 10
-< yes if ( x *= 40000 ) yes() ; else no() 6784
-< no if ( x &= 40000 ) yes() ; else no() 0
-< yes if ( x |= 40000 ) yes() ; else no() -25526
-< yes if ( x ^= 40000 ) yes() ; else no() -25526
---
> yes if ( x = 40000 ) yes() ; else no() 40000
> yes if ( x += 40000 ) yes() ; else no() 40010
> yes if ( x -= 40000 ) yes() ; else no() -39990
-> no if ( x /= 40000 ) yes() ; else no() 0
-> yes if ( x %= 40000 ) yes() ; else no() 10
+102c102
+< yes if ( x *= 40000 ) yes() ; else no() 6784
+---
> yes if ( x *= 40000 ) yes() ; else no() 400000
-> no if ( x &= 40000 ) yes() ; else no() 0
+104,105c104,105
+< yes if ( x |= 40000 ) yes() ; else no() -25526
+< yes if ( x ^= 40000 ) yes() ; else no() -25526
+---
> yes if ( x |= 40000 ) yes() ; else no() 40010
> yes if ( x ^= 40000 ) yes() ; else no() 40010
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f clu.cem.g ; then diff clu.cem.r clu.cem.g ; else echo creating clu.cem.g ; cp clu.cem.r clu.cem.g ; fi
sed -f ec.sed <OPS >ec.c
-em24 -DNOFLOAT ec.c
-ec.c
+compiling ec.c
"ec.c", line 58: (warning) overflow in constant expression
"ec.c", line 64: (warning) overflow in constant expression
running ec.cem
comparing ec
sed -f ef.sed <OPS >ef.c
-em24 -DNOFLOAT ef.c
-ef.c
+compiling ef.c
running ef.cem
comparing ef
-0a1,$
+0a1,72
> .4e-5 + .3e-5
> .4e-5 - .3e-5
> .4e-5 / .3e-5
> yes if ( x -- ) yes() ; else no() 2.141500e+00
> yes if ( -- x ) yes() ; else no() 2.141500e+00
> yes if ( ++ x ) yes() ; else no() 4.141500e+00
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f ef.cem.g ; then diff ef.cem.r ef.cem.g ; else echo creating ef.cem.g ; cp ef.cem.r ef.cem.g ; fi
sed -f ei.sed <OPS >ei.c
-em24 -DNOFLOAT ei.c
-ei.c
+compiling ei.c
"ei.c", line 22: (warning) overflow in constant expression
"ei.c", line 65: (warning) overflow in constant expression
"ei.c", line 108: (warning) overflow in constant expression
< yes if ( x <<= 15 ) yes() ; else no() -32768
---
> yes if ( x <<= 15 ) yes() ; else no() 8355840
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f ei.cem.g ; then diff ei.cem.r ei.cem.g ; else echo creating ei.cem.g ; cp ei.cem.r ei.cem.g ; fi
sed -f el.sed <OPS >el.c
-em24 -DNOFLOAT el.c
-el.c
+compiling el.c
running el.cem
comparing el
sed -f eu.sed <OPS >eu.c
-em24 -DNOFLOAT eu.c
-eu.c
+compiling eu.c
"eu.c", line 58: (warning) overflow in unsigned constant expression
"eu.c", line 64: (warning) overflow in unsigned constant expression
running eu.cem
comparing eu
-23,31c23,31
+23,25c23,25
< x = 40000 -25536
< x += 40000 -25526
< x -= 40000 25546
-< x /= 40000 0
-< x %= 40000 10
-< x *= 40000 6784
-< x &= 40000 0
-< x |= 40000 -25526
-< x ^= 40000 -25526
---
> x = 40000 40000
> x += 40000 40010
> x -= 40000 -39990
-> x /= 40000 0
-> x %= 40000 10
+28c28
+< x *= 40000 6784
+---
> x *= 40000 400000
-> x &= 40000 0
+30,31c30,31
+< x |= 40000 -25526
+< x ^= 40000 -25526
+---
> x |= 40000 40010
> x ^= 40000 40010
38c38
< y = ( 40000 + 8012 ) -17524
---
> y = ( 40000 + 8012 ) 48012
-42,52c42,52
+42c42
< y = ( 40000 * 8012 ) 8960
-< y = ( 40000 & 8012 ) 7232
+---
+> y = ( 40000 * 8012 ) 320480000
+44,45c44,45
< y = ( 40000 | 8012 ) -24756
< y = ( 40000 ^ 8012 ) -31988
-< y = ( 40000 || 8012 ) 1
-< y = ( 40000 && 8012 ) 1
-< y = ( 40000 << 9 ) -32768
-< y = ( 40000 >> 9 ) 78
-< y = ( -40000 ) 25536
-< y = ( !40000 ) 0
-< y = ( ~40000 ) 25535
---
-> y = ( 40000 * 8012 ) 320480000
-> y = ( 40000 & 8012 ) 7232
> y = ( 40000 | 8012 ) 40780
> y = ( 40000 ^ 8012 ) 33548
-> y = ( 40000 || 8012 ) 1
-> y = ( 40000 && 8012 ) 1
+48c48
+< y = ( 40000 << 9 ) -32768
+---
> y = ( 40000 << 9 ) 20480000
-> y = ( 40000 >> 9 ) 78
+50c50
+< y = ( -40000 ) 25536
+---
> y = ( -40000 ) -40000
-> y = ( !40000 ) 0
+52c52
+< y = ( ~40000 ) 25535
+---
> y = ( ~40000 ) -40001
-59,68c59,68
+59,62c59,62
< y = ( 40000 ? 40000 : 8012 ) -25536
< y = ( x = 40000 ) -25536 -25536
< y = ( x += 40000 ) -25526 -25526
< y = ( x -= 40000 ) 25546 25546
-< y = ( x /= 40000 ) 0 0
-< y = ( x %= 40000 ) 10 10
-< y = ( x *= 40000 ) 6784 6784
-< y = ( x &= 40000 ) 0 0
-< y = ( x |= 40000 ) -25526 -25526
-< y = ( x ^= 40000 ) -25526 -25526
---
> y = ( 40000 ? 40000 : 8012 ) 40000
> y = ( x = 40000 ) 40000 40000
> y = ( x += 40000 ) 40010 40010
> y = ( x -= 40000 ) -39990 -39990
-> y = ( x /= 40000 ) 0 0
-> y = ( x %= 40000 ) 10 10
+65c65
+< y = ( x *= 40000 ) 6784 6784
+---
> y = ( x *= 40000 ) 400000 400000
-> y = ( x &= 40000 ) 0 0
+67,68c67,68
+< y = ( x |= 40000 ) -25526 -25526
+< y = ( x ^= 40000 ) -25526 -25526
+---
> y = ( x |= 40000 ) 40010 40010
> y = ( x ^= 40000 ) 40010 40010
-97,105c97,105
+97,99c97,99
< yes if ( x = 40000 ) yes() ; else no() -25536
< yes if ( x += 40000 ) yes() ; else no() -25526
< yes if ( x -= 40000 ) yes() ; else no() 25546
-< no if ( x /= 40000 ) yes() ; else no() 0
-< yes if ( x %= 40000 ) yes() ; else no() 10
-< yes if ( x *= 40000 ) yes() ; else no() 6784
-< no if ( x &= 40000 ) yes() ; else no() 0
-< yes if ( x |= 40000 ) yes() ; else no() -25526
-< yes if ( x ^= 40000 ) yes() ; else no() -25526
---
> yes if ( x = 40000 ) yes() ; else no() 40000
> yes if ( x += 40000 ) yes() ; else no() 40010
> yes if ( x -= 40000 ) yes() ; else no() -39990
-> no if ( x /= 40000 ) yes() ; else no() 0
-> yes if ( x %= 40000 ) yes() ; else no() 10
+102c102
+< yes if ( x *= 40000 ) yes() ; else no() 6784
+---
> yes if ( x *= 40000 ) yes() ; else no() 400000
-> no if ( x &= 40000 ) yes() ; else no() 0
+104,105c104,105
+< yes if ( x |= 40000 ) yes() ; else no() -25526
+< yes if ( x ^= 40000 ) yes() ; else no() -25526
+---
> yes if ( x |= 40000 ) yes() ; else no() 40010
> yes if ( x ^= 40000 ) yes() ; else no() 40010
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f eu.cem.g ; then diff eu.cem.r eu.cem.g ; else echo creating eu.cem.g ; cp eu.cem.r eu.cem.g ; fi
sed -f id.sed <OPS >id.c
-em24 -DNOFLOAT id.c
-id.c
+compiling id.c
running id.cem
comparing id
-0a1,$
+0a1,72
> (-40) + 300
> (-40) - 300
> (-40) / 300
> yes if ( x -- ) yes() ; else no() 2.141500e+00
> yes if ( -- x ) yes() ; else no() 2.141500e+00
> yes if ( ++ x ) yes() ; else no() 4.141500e+00
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f id.cem.g ; then diff id.cem.r id.cem.g ; else echo creating id.cem.g ; cp id.cem.r id.cem.g ; fi
sed -f lc.sed <OPS >lc.c
-em24 -DNOFLOAT lc.c
-lc.c
+compiling lc.c
"lc.c", line 60: (warning) overflow in constant expression
"lc.c", line 66: (warning) overflow in constant expression
running lc.cem
comparing lc
sed -f ld.sed <OPS >ld.c
-em24 -DNOFLOAT ld.c
-ld.c
+compiling ld.c
running ld.cem
comparing ld
-0a1,$
+0a1,72
> .4e-5 + .3e-5
> .4e-5 - .3e-5
> .4e-5 / .3e-5
> yes if ( x -- ) yes() ; else no() 2.141500e+00
> yes if ( -- x ) yes() ; else no() 2.141500e+00
> yes if ( ++ x ) yes() ; else no() 4.141500e+00
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f ld.cem.g ; then diff ld.cem.r ld.cem.g ; else echo creating ld.cem.g ; cp ld.cem.r ld.cem.g ; fi
sed -f lf.sed <OPS >lf.c
-em24 -DNOFLOAT lf.c
-lf.c
+compiling lf.c
running lf.cem
comparing lf
-0a1,$
+0a1,72
> .4e-5 + .3e-5
> .4e-5 - .3e-5
> .4e-5 / .3e-5
> yes if ( x -- ) yes() ; else no() 2.141500e+00
> yes if ( -- x ) yes() ; else no() 2.141500e+00
> yes if ( ++ x ) yes() ; else no() 4.141500e+00
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f lf.cem.g ; then diff lf.cem.r lf.cem.g ; else echo creating lf.cem.g ; cp lf.cem.r lf.cem.g ; fi
sed -f li.sed <OPS >li.c
-em24 -DNOFLOAT li.c
-li.c
+compiling li.c
"li.c", line 22: (warning) overflow in constant expression
"li.c", line 67: (warning) overflow in constant expression
"li.c", line 112: (warning) overflow in constant expression
< yes if ( x <<= 15 ) yes() ; else no() -32768
---
> yes if ( x <<= 15 ) yes() ; else no() 8355840
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f li.cem.g ; then diff li.cem.r li.cem.g ; else echo creating li.cem.g ; cp li.cem.r li.cem.g ; fi
sed -f ll.sed <OPS >ll.c
-em24 -DNOFLOAT ll.c
-ll.c
+compiling ll.c
running ll.cem
comparing ll
sed -f lu.sed <OPS >lu.c
-em24 -DNOFLOAT lu.c
-lu.c
+compiling lu.c
running lu.cem
comparing lu
-23,31c23,31
+23,25c23,25
< z = x -25302
< z += x -25292
< z -= x 25312
-< z /= x 0
-< z %= x 10
-< z *= x 9124
-< z &= x 10
-< z |= x -25302
-< z ^= x -25312
---
> z = x 40234
> z += x 40244
> z -= x -40224
-> z /= x 0
-> z %= x 10
+28c28
+< z *= x 9124
+---
> z *= x 402340
-> z &= x 10
+30,31c30,31
+< z |= x -25302
+< z ^= x -25312
+---
> z |= x 40234
> z ^= x 40224
38c38
< y = ( x + 8012 ) -17290
---
> y = ( x + 8012 ) 48246
-42,52c42,52
+42c42
< y = ( x * 8012 ) -16776
-< y = ( x & 8012 ) 7432
+---
+> y = ( x * 8012 ) 322354808
+44,45c44,45
< y = ( x | 8012 ) -24722
< y = ( x ^ 8012 ) -32154
-< y = ( x || 8012 ) 1
-< y = ( x && 8012 ) 1
-< y = ( x << 9 ) 21504
-< y = ( x >> 9 ) 78
-< y = ( -x ) 25302
-< y = ( !x ) 0
-< y = ( ~x ) 25301
---
-> y = ( x * 8012 ) 322354808
-> y = ( x & 8012 ) 7432
> y = ( x | 8012 ) 40814
> y = ( x ^ 8012 ) 33382
-> y = ( x || 8012 ) 1
-> y = ( x && 8012 ) 1
+48c48
+< y = ( x << 9 ) 21504
+---
> y = ( x << 9 ) 20599808
-> y = ( x >> 9 ) 78
+50c50
+< y = ( -x ) 25302
+---
> y = ( -x ) -40234
-> y = ( !x ) 0
+52c52
+< y = ( ~x ) 25301
+---
> y = ( ~x ) -40235
-59,68c59,68
+59,62c59,62
< y = ( x ? x : 8012 ) -25302
< y = ( z = x ) -25302 -25302
< y = ( z += x ) -25292 -25292
< y = ( z -= x ) 25312 25312
-< y = ( z /= x ) 0 0
-< y = ( z %= x ) 10 10
-< y = ( z *= x ) 9124 9124
-< y = ( z &= x ) 10 10
-< y = ( z |= x ) -25302 -25302
-< y = ( z ^= x ) -25312 -25312
---
> y = ( x ? x : 8012 ) 40234
> y = ( z = x ) 40234 40234
> y = ( z += x ) 40244 40244
> y = ( z -= x ) -40224 -40224
-> y = ( z /= x ) 0 0
-> y = ( z %= x ) 10 10
+65c65
+< y = ( z *= x ) 9124 9124
+---
> y = ( z *= x ) 402340 402340
-> y = ( z &= x ) 10 10
+67,68c67,68
+< y = ( z |= x ) -25302 -25302
+< y = ( z ^= x ) -25312 -25312
+---
> y = ( z |= x ) 40234 40234
> y = ( z ^= x ) 40224 40224
-97,105c97,105
+97,99c97,99
< yes if ( z = x ) yes() ; else no() -25302
< yes if ( z += x ) yes() ; else no() -25292
< yes if ( z -= x ) yes() ; else no() 25312
-< no if ( z /= x ) yes() ; else no() 0
-< yes if ( z %= x ) yes() ; else no() 10
-< yes if ( z *= x ) yes() ; else no() 9124
-< yes if ( z &= x ) yes() ; else no() 10
-< yes if ( z |= x ) yes() ; else no() -25302
-< yes if ( z ^= x ) yes() ; else no() -25312
---
> yes if ( z = x ) yes() ; else no() 40234
> yes if ( z += x ) yes() ; else no() 40244
> yes if ( z -= x ) yes() ; else no() -40224
-> no if ( z /= x ) yes() ; else no() 0
-> yes if ( z %= x ) yes() ; else no() 10
+102c102
+< yes if ( z *= x ) yes() ; else no() 9124
+---
> yes if ( z *= x ) yes() ; else no() 402340
-> yes if ( z &= x ) yes() ; else no() 10
+104,105c104,105
+< yes if ( z |= x ) yes() ; else no() -25302
+< yes if ( z ^= x ) yes() ; else no() -25312
+---
> yes if ( z |= x ) yes() ; else no() 40234
> yes if ( z ^= x ) yes() ; else no() 40224
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f lu.cem.g ; then diff lu.cem.r lu.cem.g ; else echo creating lu.cem.g ; cp lu.cem.r lu.cem.g ; fi
***** ctill
All program(s) in this directory should fail to compile.
-em24 -DNOFLOAT noarg.c
-noarg.c
+compiling noarg.c
"noarg.c", line 14: name not in parameter list
*** Error code 1
-`gen' not remade because of errors
+The following command caused the error:
+acc -mem24 -DNOFLOAT -o noarg.cem noarg.c 1>/dev/null
+make: Warning: Target `gen' not remade because of errors
***** ctinit
-em24 -DNOFLOAT init.c
-init.c
-"init.c", line 172: (warning) overflow in constant expression
+compiling init.c
running init.cem
comparing init
-41,$c41,$
-< long
-<
-< lo1 14
-< lo2 -17
-< lo3 2147483647
-< lo4 0
-< lo5 0
-< lo6 1
-<
-< structures
-<
-< st1 sta[0..2]
-< s_i 0 1 2 3
-< s_ca[0] 0 97 0 0
-< s_ca[1] 0 98 0 0
-< s_ca[2] 0 99 0 0
-< s_l 0 10 0 0
-< (sta[0].s_s1)->s_i = 1
-<
-< bit fields:
-<
-< sizeof stb 6
-< stb -1 -2 3 4 -1 6 7
-<
----
+40a41,86
> Floats:
>
> fl1 0.00000000000000000000e+00
> fl2 2.00000000000000000000e+00
> fl2 2.00000000000000000000e+00
> fl4 4.00000000000000000000e+00
-> fl5 2.93873587705571892581e-39
-> fl6 1.70141173319264428000e+38
+> fl5 2.93873587705571876995e-39
+> fl6 1.70141173319264429908e+38
> fl7 0.00000000000000000000e+00
> fla1 fla2 fla3
> 1.000000e+00 -1.000000e+00 1.100000e+01
> dbl2 2.00000000000000000000e+00
> dbl2 2.00000000000000000000e+00
> dbl4 4.00000000000000000000e+00
-> dbl5 2.93873600000000034793e-39
-> dbl6 1.70141170000000000000e+38
+> dbl5 2.93873600000000015650e-39
+> dbl6 1.70141169999999996199e+38
> dbl7 0.00000000000000000000e+00
> dbla1 dbla2 dbla3
> 1.000000e+00 -1.000000e+00 1.100000e+01
> 0.000000e+00 0.000000e+00 0.000000e+00
> 0.000000e+00 0.000000e+00 0.000000e+00
>
-> long
->
-> lo1 14
-> lo2 -17
-> lo3 2147483647
-> lo4 -2147483648
-> lo5 0
-> lo6 1
->
-> structures
->
-> st1 sta[0..2]
-> s_i 0 1 2 3
-> s_ca[0] 0 97 0 0
-> s_ca[1] 0 98 0 0
-> s_ca[2] 0 99 0 0
-> s_l 0 10 0 0
+57a104,105
> s_f 0.000000e+00 -1.000000e+01 0.000000e+00 0.000000e+00
>
-> (sta[0].s_s1)->s_i = 1
->
-> bit fields:
->
+62c110
+< sizeof stb 6
+---
> sizeof stb 8
-> stb -1 -2 3 4 -1 6 7
->
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f init.cem.g ; then diff init.cem.r init.cem.g ; else echo creating init.cem.g ; cp init.cem.r init.cem.g ; fi
***** ctmargt
-em24 -DNOFLOAT margt.c
-margt.c
+compiling margt.c
running margt.cem
comparing margt
+5c5
+< CEM=acc -mem24 -DNOFLOAT
+---
+> CEM=acc
+11c11
+< RUN=em
+---
+> RUN=
+The following command caused the error:
+if test -f margt.cem.g ; then diff margt.cem.r margt.cem.g ; else echo creating margt.cem.g ; cp margt.cem.r margt.cem.g ; fi
***** ctprof
test profiling
procentry.c
-em24 -DNOFLOAT tp.c procentry.m
+compiling tp.c procentry.m
tp.c
running tp.cem
comparing tp
***** ctsetjmp
-em24 -DNOFLOAT stjmp.c
-stjmp.c
+compiling stjmp.c
running stjmp.cem
comparing stjmp
***** ctstruct
-em24 -DNOFLOAT str.c
-str.c
-running str.cem
comparing str
***** ctsys
-em24 -DNOFLOAT tfork.c
-tfork.c
+compiling tfork.c
running tfork.cem
comparing tfork
-1,$c1,$
-< childno 14497
-< Child 14497, status 0x800
-< fork/wait ok
----
-> childno 16276
-> Child 16276, status 0x800
-> fork/wait ok
-*** Error code 1 (ignored)
-Wed Apr 27 13:39:12 MET DST 1988
+Mon Nov 20 09:17:26 MET 1989
-Thu Apr 28 12:20:53 MET DST 1988
+Fri Nov 17 17:19:16 MET 1989
+Compilation command: acc -mem24
+Run command: em
***** ctconv
-em24 conv.c
-conv.c
+compiling conv.c
"conv.c", line 38: (warning) overflow in constant expression
running conv.cem
comparing conv
-14,25c14,25
+14c14
< char -1, int -1, unsigned 177777, long -1
-< float -1.000000
-< char -1, int -1, unsigned 177777, long -1
-< float -1.000000
-< From integer
-< char -64, int -64, unsigned 177700, long -64
-< float -64.000000
-< From long
-< char -3, int -3, unsigned 177775, long -3
-< float -3.000000
-< Casts from long
-< char -8, int 9464, unsigned short 22370, long 75000
---
> char -1, int -1, unsigned 37777777777, long -1
-> float -1.000000
+16c16
+< char -1, int -1, unsigned 177777, long -1
+---
> char -1, int -1, unsigned 37777777777, long -1
-> float -1.000000
-> From integer
+19c19
+< char -64, int -64, unsigned 177700, long -64
+---
> char -64, int -64, unsigned 37777777700, long -64
-> float -64.000000
-> From long
+22c22
+< char -3, int -3, unsigned 177775, long -3
+---
> char -3, int -3, unsigned 37777777775, long -3
-> float -3.000000
-> Casts from long
+25c25
+< char -8, int 9464, unsigned short 22370, long 75000
+---
> char -8, int 75000, unsigned short 22370, long 75000
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f conv.cem.g ; then diff conv.cem.r conv.cem.g ; else echo creating conv.cem.g ; cp conv.cem.r conv.cem.g ; fi
***** ctdecl
-em24 decl.c
-decl.c
+compiling decl.c
running decl.cem
comparing decl
***** ctdivers
-em24 ops.c
-ops.c
+compiling ops.c
running ops.cem
comparing ops
-22,37c22,39
-< u<<0 150715
+21a22
+> u>>16 0
+23,37c24,39
< u<<1 121632
< u<<2 43464
< u<<3 107150
< u<<14 40000
< u<<15 100000
---
-> u>>16 0
-> u<<0 150715
> u<<1 321632
> u<<2 643464
> u<<3 1507150
> u<<14 6434640000
> u<<15 15071500000
> u<<16 32163200000
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f ops.cem.g ; then diff ops.cem.r ops.cem.g ; else echo creating ops.cem.g ; cp ops.cem.r ops.cem.g ; fi
***** cterr
-em24 bugs.c
-bugs.c
+compiling bugs.c
"bugs.c", line 88: (warning) overflow in constant expression
running bugs.cem
comparing bugs
***** ctest1
-em24 test.c
-test.c
+compiling test.c
running test.cem
comparing test
***** ctest2
-em24 t7.c
-t7.c
+compiling t7.c
running t7.cem
comparing t7
***** ctest3
-em24 test2.c
-test2.c
+compiling test2.c
"test2.c", line 448: (warning) conversion of pointer to int loses accuracy
"test2.c", line 448: (warning) conversion of pointer to int loses accuracy
running test2.cem
comparing test2
***** ctest5
-em24 test1.c
-test1.c
+compiling test1.c
"test1.c", line 375: (warning) incompatible pointers in =
"test1.c", line 376: (warning) incompatible pointers in =
"test1.c", line 377: (warning) incompatible pointers in =
comparing test1
***** ctgen
sed -f bf.sed <OPS >bf.c
-em24 bf.c
-bf.c
+compiling bf.c
running bf.cem
comparing bf
+sed -f bfu.sed <OPS >bfu.c
+compiling bfu.c
+running bfu.cem
+comparing bfu
sed -f cel.sed <OPS >cel.c
-em24 cel.c
-cel.c
+compiling cel.c
running cel.cem
comparing cel
sed -f clu.sed <OPS >clu.c
-em24 clu.c
-clu.c
+compiling clu.c
"clu.c", line 60: (warning) overflow in unsigned constant expression
"clu.c", line 66: (warning) overflow in unsigned constant expression
running clu.cem
comparing clu
-23,31c23,31
+23,25c23,25
< x = 40000 -25536
< x += 40000 -25526
< x -= 40000 25546
-< x /= 40000 0
-< x %= 40000 10
-< x *= 40000 6784
-< x &= 40000 0
-< x |= 40000 -25526
-< x ^= 40000 -25526
---
> x = 40000 40000
> x += 40000 40010
> x -= 40000 -39990
-> x /= 40000 0
-> x %= 40000 10
+28c28
+< x *= 40000 6784
+---
> x *= 40000 400000
-> x &= 40000 0
+30,31c30,31
+< x |= 40000 -25526
+< x ^= 40000 -25526
+---
> x |= 40000 40010
> x ^= 40000 40010
38c38
< y = ( 40000 + 8012 ) -17524
---
> y = ( 40000 + 8012 ) 48012
-42,52c42,52
+42c42
< y = ( 40000 * 8012 ) 8960
-< y = ( 40000 & 8012 ) 7232
+---
+> y = ( 40000 * 8012 ) 320480000
+44,45c44,45
< y = ( 40000 | 8012 ) -24756
< y = ( 40000 ^ 8012 ) -31988
-< y = ( 40000 || 8012 ) 1
-< y = ( 40000 && 8012 ) 1
-< y = ( 40000 << 9 ) -32768
-< y = ( 40000 >> 9 ) 78
-< y = ( -40000 ) 25536
-< y = ( !40000 ) 0
-< y = ( ~40000 ) 25535
---
-> y = ( 40000 * 8012 ) 320480000
-> y = ( 40000 & 8012 ) 7232
> y = ( 40000 | 8012 ) 40780
> y = ( 40000 ^ 8012 ) 33548
-> y = ( 40000 || 8012 ) 1
-> y = ( 40000 && 8012 ) 1
+48c48
+< y = ( 40000 << 9 ) -32768
+---
> y = ( 40000 << 9 ) 20480000
-> y = ( 40000 >> 9 ) 78
+50c50
+< y = ( -40000 ) 25536
+---
> y = ( -40000 ) -40000
-> y = ( !40000 ) 0
+52c52
+< y = ( ~40000 ) 25535
+---
> y = ( ~40000 ) -40001
-59,68c59,68
+59,62c59,62
< y = ( 40000 ? 40000 : 8012 ) -25536
< y = ( x = 40000 ) -25536 -25536
< y = ( x += 40000 ) -25526 -25526
< y = ( x -= 40000 ) 25546 25546
-< y = ( x /= 40000 ) 0 0
-< y = ( x %= 40000 ) 10 10
-< y = ( x *= 40000 ) 6784 6784
-< y = ( x &= 40000 ) 0 0
-< y = ( x |= 40000 ) -25526 -25526
-< y = ( x ^= 40000 ) -25526 -25526
---
> y = ( 40000 ? 40000 : 8012 ) 40000
> y = ( x = 40000 ) 40000 40000
> y = ( x += 40000 ) 40010 40010
> y = ( x -= 40000 ) -39990 -39990
-> y = ( x /= 40000 ) 0 0
-> y = ( x %= 40000 ) 10 10
+65c65
+< y = ( x *= 40000 ) 6784 6784
+---
> y = ( x *= 40000 ) 400000 400000
-> y = ( x &= 40000 ) 0 0
+67,68c67,68
+< y = ( x |= 40000 ) -25526 -25526
+< y = ( x ^= 40000 ) -25526 -25526
+---
> y = ( x |= 40000 ) 40010 40010
> y = ( x ^= 40000 ) 40010 40010
-97,105c97,105
+97,99c97,99
< yes if ( x = 40000 ) yes() ; else no() -25536
< yes if ( x += 40000 ) yes() ; else no() -25526
< yes if ( x -= 40000 ) yes() ; else no() 25546
-< no if ( x /= 40000 ) yes() ; else no() 0
-< yes if ( x %= 40000 ) yes() ; else no() 10
-< yes if ( x *= 40000 ) yes() ; else no() 6784
-< no if ( x &= 40000 ) yes() ; else no() 0
-< yes if ( x |= 40000 ) yes() ; else no() -25526
-< yes if ( x ^= 40000 ) yes() ; else no() -25526
---
> yes if ( x = 40000 ) yes() ; else no() 40000
> yes if ( x += 40000 ) yes() ; else no() 40010
> yes if ( x -= 40000 ) yes() ; else no() -39990
-> no if ( x /= 40000 ) yes() ; else no() 0
-> yes if ( x %= 40000 ) yes() ; else no() 10
+102c102
+< yes if ( x *= 40000 ) yes() ; else no() 6784
+---
> yes if ( x *= 40000 ) yes() ; else no() 400000
-> no if ( x &= 40000 ) yes() ; else no() 0
+104,105c104,105
+< yes if ( x |= 40000 ) yes() ; else no() -25526
+< yes if ( x ^= 40000 ) yes() ; else no() -25526
+---
> yes if ( x |= 40000 ) yes() ; else no() 40010
> yes if ( x ^= 40000 ) yes() ; else no() 40010
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f clu.cem.g ; then diff clu.cem.r clu.cem.g ; else echo creating clu.cem.g ; cp clu.cem.r clu.cem.g ; fi
sed -f ec.sed <OPS >ec.c
-em24 ec.c
-ec.c
+compiling ec.c
"ec.c", line 58: (warning) overflow in constant expression
"ec.c", line 64: (warning) overflow in constant expression
running ec.cem
comparing ec
sed -f ef.sed <OPS >ef.c
-em24 ef.c
-ef.c
+compiling ef.c
running ef.cem
comparing ef
sed -f ei.sed <OPS >ei.c
-em24 ei.c
-ei.c
+compiling ei.c
"ei.c", line 22: (warning) overflow in constant expression
"ei.c", line 65: (warning) overflow in constant expression
"ei.c", line 108: (warning) overflow in constant expression
< yes if ( x <<= 15 ) yes() ; else no() -32768
---
> yes if ( x <<= 15 ) yes() ; else no() 8355840
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f ei.cem.g ; then diff ei.cem.r ei.cem.g ; else echo creating ei.cem.g ; cp ei.cem.r ei.cem.g ; fi
sed -f el.sed <OPS >el.c
-em24 el.c
-el.c
+compiling el.c
running el.cem
comparing el
sed -f eu.sed <OPS >eu.c
-em24 eu.c
-eu.c
+compiling eu.c
"eu.c", line 58: (warning) overflow in unsigned constant expression
"eu.c", line 64: (warning) overflow in unsigned constant expression
running eu.cem
comparing eu
-23,31c23,31
+23,25c23,25
< x = 40000 -25536
< x += 40000 -25526
< x -= 40000 25546
-< x /= 40000 0
-< x %= 40000 10
-< x *= 40000 6784
-< x &= 40000 0
-< x |= 40000 -25526
-< x ^= 40000 -25526
---
> x = 40000 40000
> x += 40000 40010
> x -= 40000 -39990
-> x /= 40000 0
-> x %= 40000 10
+28c28
+< x *= 40000 6784
+---
> x *= 40000 400000
-> x &= 40000 0
+30,31c30,31
+< x |= 40000 -25526
+< x ^= 40000 -25526
+---
> x |= 40000 40010
> x ^= 40000 40010
38c38
< y = ( 40000 + 8012 ) -17524
---
> y = ( 40000 + 8012 ) 48012
-42,52c42,52
+42c42
< y = ( 40000 * 8012 ) 8960
-< y = ( 40000 & 8012 ) 7232
+---
+> y = ( 40000 * 8012 ) 320480000
+44,45c44,45
< y = ( 40000 | 8012 ) -24756
< y = ( 40000 ^ 8012 ) -31988
-< y = ( 40000 || 8012 ) 1
-< y = ( 40000 && 8012 ) 1
-< y = ( 40000 << 9 ) -32768
-< y = ( 40000 >> 9 ) 78
-< y = ( -40000 ) 25536
-< y = ( !40000 ) 0
-< y = ( ~40000 ) 25535
---
-> y = ( 40000 * 8012 ) 320480000
-> y = ( 40000 & 8012 ) 7232
> y = ( 40000 | 8012 ) 40780
> y = ( 40000 ^ 8012 ) 33548
-> y = ( 40000 || 8012 ) 1
-> y = ( 40000 && 8012 ) 1
+48c48
+< y = ( 40000 << 9 ) -32768
+---
> y = ( 40000 << 9 ) 20480000
-> y = ( 40000 >> 9 ) 78
+50c50
+< y = ( -40000 ) 25536
+---
> y = ( -40000 ) -40000
-> y = ( !40000 ) 0
+52c52
+< y = ( ~40000 ) 25535
+---
> y = ( ~40000 ) -40001
-59,68c59,68
+59,62c59,62
< y = ( 40000 ? 40000 : 8012 ) -25536
< y = ( x = 40000 ) -25536 -25536
< y = ( x += 40000 ) -25526 -25526
< y = ( x -= 40000 ) 25546 25546
-< y = ( x /= 40000 ) 0 0
-< y = ( x %= 40000 ) 10 10
-< y = ( x *= 40000 ) 6784 6784
-< y = ( x &= 40000 ) 0 0
-< y = ( x |= 40000 ) -25526 -25526
-< y = ( x ^= 40000 ) -25526 -25526
---
> y = ( 40000 ? 40000 : 8012 ) 40000
> y = ( x = 40000 ) 40000 40000
> y = ( x += 40000 ) 40010 40010
> y = ( x -= 40000 ) -39990 -39990
-> y = ( x /= 40000 ) 0 0
-> y = ( x %= 40000 ) 10 10
+65c65
+< y = ( x *= 40000 ) 6784 6784
+---
> y = ( x *= 40000 ) 400000 400000
-> y = ( x &= 40000 ) 0 0
+67,68c67,68
+< y = ( x |= 40000 ) -25526 -25526
+< y = ( x ^= 40000 ) -25526 -25526
+---
> y = ( x |= 40000 ) 40010 40010
> y = ( x ^= 40000 ) 40010 40010
-97,105c97,105
+97,99c97,99
< yes if ( x = 40000 ) yes() ; else no() -25536
< yes if ( x += 40000 ) yes() ; else no() -25526
< yes if ( x -= 40000 ) yes() ; else no() 25546
-< no if ( x /= 40000 ) yes() ; else no() 0
-< yes if ( x %= 40000 ) yes() ; else no() 10
-< yes if ( x *= 40000 ) yes() ; else no() 6784
-< no if ( x &= 40000 ) yes() ; else no() 0
-< yes if ( x |= 40000 ) yes() ; else no() -25526
-< yes if ( x ^= 40000 ) yes() ; else no() -25526
---
> yes if ( x = 40000 ) yes() ; else no() 40000
> yes if ( x += 40000 ) yes() ; else no() 40010
> yes if ( x -= 40000 ) yes() ; else no() -39990
-> no if ( x /= 40000 ) yes() ; else no() 0
-> yes if ( x %= 40000 ) yes() ; else no() 10
+102c102
+< yes if ( x *= 40000 ) yes() ; else no() 6784
+---
> yes if ( x *= 40000 ) yes() ; else no() 400000
-> no if ( x &= 40000 ) yes() ; else no() 0
+104,105c104,105
+< yes if ( x |= 40000 ) yes() ; else no() -25526
+< yes if ( x ^= 40000 ) yes() ; else no() -25526
+---
> yes if ( x |= 40000 ) yes() ; else no() 40010
> yes if ( x ^= 40000 ) yes() ; else no() 40010
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f eu.cem.g ; then diff eu.cem.r eu.cem.g ; else echo creating eu.cem.g ; cp eu.cem.r eu.cem.g ; fi
sed -f id.sed <OPS >id.c
-em24 id.c
-id.c
+compiling id.c
running id.cem
comparing id
sed -f lc.sed <OPS >lc.c
-em24 lc.c
-lc.c
+compiling lc.c
"lc.c", line 60: (warning) overflow in constant expression
"lc.c", line 66: (warning) overflow in constant expression
running lc.cem
comparing lc
sed -f ld.sed <OPS >ld.c
-em24 ld.c
-ld.c
+compiling ld.c
running ld.cem
comparing ld
sed -f lf.sed <OPS >lf.c
-em24 lf.c
-lf.c
+compiling lf.c
running lf.cem
comparing lf
sed -f li.sed <OPS >li.c
-em24 li.c
-li.c
+compiling li.c
"li.c", line 22: (warning) overflow in constant expression
"li.c", line 67: (warning) overflow in constant expression
"li.c", line 112: (warning) overflow in constant expression
< yes if ( x <<= 15 ) yes() ; else no() -32768
---
> yes if ( x <<= 15 ) yes() ; else no() 8355840
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f li.cem.g ; then diff li.cem.r li.cem.g ; else echo creating li.cem.g ; cp li.cem.r li.cem.g ; fi
sed -f ll.sed <OPS >ll.c
-em24 ll.c
-ll.c
+compiling ll.c
running ll.cem
comparing ll
sed -f lu.sed <OPS >lu.c
-em24 lu.c
-lu.c
+compiling lu.c
running lu.cem
comparing lu
-23,31c23,31
+23,25c23,25
< z = x -25302
< z += x -25292
< z -= x 25312
-< z /= x 0
-< z %= x 10
-< z *= x 9124
-< z &= x 10
-< z |= x -25302
-< z ^= x -25312
---
> z = x 40234
> z += x 40244
> z -= x -40224
-> z /= x 0
-> z %= x 10
+28c28
+< z *= x 9124
+---
> z *= x 402340
-> z &= x 10
+30,31c30,31
+< z |= x -25302
+< z ^= x -25312
+---
> z |= x 40234
> z ^= x 40224
38c38
< y = ( x + 8012 ) -17290
---
> y = ( x + 8012 ) 48246
-42,52c42,52
+42c42
< y = ( x * 8012 ) -16776
-< y = ( x & 8012 ) 7432
+---
+> y = ( x * 8012 ) 322354808
+44,45c44,45
< y = ( x | 8012 ) -24722
< y = ( x ^ 8012 ) -32154
-< y = ( x || 8012 ) 1
-< y = ( x && 8012 ) 1
-< y = ( x << 9 ) 21504
-< y = ( x >> 9 ) 78
-< y = ( -x ) 25302
-< y = ( !x ) 0
-< y = ( ~x ) 25301
---
-> y = ( x * 8012 ) 322354808
-> y = ( x & 8012 ) 7432
> y = ( x | 8012 ) 40814
> y = ( x ^ 8012 ) 33382
-> y = ( x || 8012 ) 1
-> y = ( x && 8012 ) 1
+48c48
+< y = ( x << 9 ) 21504
+---
> y = ( x << 9 ) 20599808
-> y = ( x >> 9 ) 78
+50c50
+< y = ( -x ) 25302
+---
> y = ( -x ) -40234
-> y = ( !x ) 0
+52c52
+< y = ( ~x ) 25301
+---
> y = ( ~x ) -40235
-59,68c59,68
+59,62c59,62
< y = ( x ? x : 8012 ) -25302
< y = ( z = x ) -25302 -25302
< y = ( z += x ) -25292 -25292
< y = ( z -= x ) 25312 25312
-< y = ( z /= x ) 0 0
-< y = ( z %= x ) 10 10
-< y = ( z *= x ) 9124 9124
-< y = ( z &= x ) 10 10
-< y = ( z |= x ) -25302 -25302
-< y = ( z ^= x ) -25312 -25312
---
> y = ( x ? x : 8012 ) 40234
> y = ( z = x ) 40234 40234
> y = ( z += x ) 40244 40244
> y = ( z -= x ) -40224 -40224
-> y = ( z /= x ) 0 0
-> y = ( z %= x ) 10 10
+65c65
+< y = ( z *= x ) 9124 9124
+---
> y = ( z *= x ) 402340 402340
-> y = ( z &= x ) 10 10
+67,68c67,68
+< y = ( z |= x ) -25302 -25302
+< y = ( z ^= x ) -25312 -25312
+---
> y = ( z |= x ) 40234 40234
> y = ( z ^= x ) 40224 40224
-97,105c97,105
+97,99c97,99
< yes if ( z = x ) yes() ; else no() -25302
< yes if ( z += x ) yes() ; else no() -25292
< yes if ( z -= x ) yes() ; else no() 25312
-< no if ( z /= x ) yes() ; else no() 0
-< yes if ( z %= x ) yes() ; else no() 10
-< yes if ( z *= x ) yes() ; else no() 9124
-< yes if ( z &= x ) yes() ; else no() 10
-< yes if ( z |= x ) yes() ; else no() -25302
-< yes if ( z ^= x ) yes() ; else no() -25312
---
> yes if ( z = x ) yes() ; else no() 40234
> yes if ( z += x ) yes() ; else no() 40244
> yes if ( z -= x ) yes() ; else no() -40224
-> no if ( z /= x ) yes() ; else no() 0
-> yes if ( z %= x ) yes() ; else no() 10
+102c102
+< yes if ( z *= x ) yes() ; else no() 9124
+---
> yes if ( z *= x ) yes() ; else no() 402340
-> yes if ( z &= x ) yes() ; else no() 10
+104,105c104,105
+< yes if ( z |= x ) yes() ; else no() -25302
+< yes if ( z ^= x ) yes() ; else no() -25312
+---
> yes if ( z |= x ) yes() ; else no() 40234
> yes if ( z ^= x ) yes() ; else no() 40224
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f lu.cem.g ; then diff lu.cem.r lu.cem.g ; else echo creating lu.cem.g ; cp lu.cem.r lu.cem.g ; fi
***** ctill
All program(s) in this directory should fail to compile.
-em24 noarg.c
-noarg.c
+compiling noarg.c
"noarg.c", line 14: name not in parameter list
*** Error code 1
-`gen' not remade because of errors
+The following command caused the error:
+acc -mem24 -o noarg.cem noarg.c 1>/dev/null
+make: Warning: Target `gen' not remade because of errors
***** ctinit
-em24 init.c
-init.c
-"init.c", line 172: (warning) overflow in constant expression
+compiling init.c
running init.cem
comparing init
-47,48c47,48
-< fl5 2.93873587705571956974e-39
-< fl6 1.70141173319264450000e+38
----
-> fl5 2.93873587705571892581e-39
-> fl6 1.70141173319264428000e+38
-70c70
-< dbl5 2.93873600000000188004e-39
----
-> dbl5 2.93873600000000034793e-39
-92c92
-< lo4 0
----
-> lo4 -2147483648
-110,$c110,$
+110c110
< sizeof stb 6
-< stb -1 -2 3 4 -1 6 7
-<
---
> sizeof stb 8
-> stb -1 -2 3 4 -1 6 7
->
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f init.cem.g ; then diff init.cem.r init.cem.g ; else echo creating init.cem.g ; cp init.cem.r init.cem.g ; fi
***** ctmargt
-em24 margt.c
-margt.c
+compiling margt.c
running margt.cem
comparing margt
+5c5
+< CEM=acc -mem24
+---
+> CEM=acc
+11c11
+< RUN=em
+---
+> RUN=
+The following command caused the error:
+if test -f margt.cem.g ; then diff margt.cem.r margt.cem.g ; else echo creating margt.cem.g ; cp margt.cem.r margt.cem.g ; fi
***** ctprof
test profiling
procentry.c
-em24 tp.c procentry.m
+compiling tp.c procentry.m
tp.c
running tp.cem
comparing tp
***** ctsetjmp
-em24 stjmp.c
-stjmp.c
+compiling stjmp.c
running stjmp.cem
comparing stjmp
***** ctstruct
-em24 str.c
-str.c
-running str.cem
comparing str
***** ctsys
-em24 tfork.c
-tfork.c
+compiling tfork.c
running tfork.cem
comparing tfork
-1,$c1,$
-< childno 6310
-< Child 6310, status 0x800
-< fork/wait ok
----
-> childno 16276
-> Child 16276, status 0x800
-> fork/wait ok
-*** Error code 1 (ignored)
-Thu Apr 28 12:54:21 MET DST 1988
+Fri Nov 17 17:29:58 MET 1989
-Tue Apr 26 14:36:39 MET DST 1988
+Fri Nov 17 15:33:31 MET 1989
+Compilation command: acc -DNOFLOAT
***** ctconv
-acc -DNOFLOAT conv.c
-conv.c
+compiling conv.c
"conv.c", line 38: (warning) overflow in constant expression
running conv.cem
comparing conv
2a3,4
> (float) 12 = 12.000000
> (int) 3.14 = 3
-11,$c13,$
-< char -1, int -1, unsigned 37777777777, long -1
-< char -1, int -1, unsigned 37777777777, long -1
-< From integer
-< char -64, int -64, unsigned 37777777700, long -64
-< From long
-< char -3, int -3, unsigned 37777777775, long -3
-< Casts from long
-< char -8, int 75000, unsigned short 22370, long 75000
-< a[l] (l==3) -17
-< a[3l] -17
-< (unsigned short) 0x1f010L = 0xf010
-< (short) 0x1f010L = 0xfffff010
----
+10a13
> float 127.000000
-> char -1, int -1, unsigned 37777777777, long -1
+11a15
> float -1.000000
-> char -1, int -1, unsigned 37777777777, long -1
+12a17
> float -1.000000
-> From integer
-> char -64, int -64, unsigned 37777777700, long -64
+14a20
> float -64.000000
-> From long
-> char -3, int -3, unsigned 37777777775, long -3
+16a23
> float -3.000000
-> Casts from long
-> char -8, int 75000, unsigned short 22370, long 75000
+18a26,30
> From float
> char 121, int 121, unsigned 171, long 121, float 121.500000
> char 0, int 0, unsigned 0, long 0, float 0.000100
> int 32766, unsigned 77776, long 32766, float 32766.000000
> long 1223432064, float 1223432064.000000
-> a[l] (l==3) -17
-> a[3l] -17
-> (unsigned short) 0x1f010L = 0xf010
-> (short) 0x1f010L = 0xfffff010
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f conv.cem.g ; then diff conv.cem.r conv.cem.g ; else echo creating conv.cem.g ; cp conv.cem.r conv.cem.g ; fi
***** ctdecl
-acc -DNOFLOAT decl.c
-decl.c
+compiling decl.c
running decl.cem
comparing decl
***** ctdivers
-acc -DNOFLOAT ops.c
-ops.c
+compiling ops.c
running ops.cem
comparing ops
***** cterr
-acc -DNOFLOAT bugs.c
-bugs.c
+compiling bugs.c
"bugs.c", line 88: (warning) overflow in constant expression
running bugs.cem
comparing bugs
***** ctest1
-acc -DNOFLOAT test.c
-test.c
+compiling test.c
running test.cem
comparing test
-1,$c1,$
+1c1
< End of test program, 10 tests completed, 0 errors detected
---
> End of test program, 11 tests completed, 0 errors detected
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f test.cem.g ; then diff test.cem.r test.cem.g ; else echo creating test.cem.g ; cp test.cem.r test.cem.g ; fi
***** ctest2
-acc -DNOFLOAT t7.c
-t7.c
+compiling t7.c
running t7.cem
comparing t7
***** ctest3
-acc -DNOFLOAT test2.c
-test2.c
+compiling test2.c
running test2.cem
comparing test2
***** ctest5
-acc -DNOFLOAT test1.c
-test1.c
+compiling test1.c
"test1.c", line 375: (warning) incompatible pointers in =
"test1.c", line 376: (warning) incompatible pointers in =
"test1.c", line 377: (warning) incompatible pointers in =
"test1.c", line 426: (warning) incompatible pointers in =
running test1.cem
comparing test1
-1,$c1,$
-< program test1
+0a1
+> error 13 in test 11
+2c3
< 10 tests completed. Number of errors = 0
---
-> error 13 in test 11
-> program test1
> 11 tests completed. Number of errors = 1
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f test1.cem.g ; then diff test1.cem.r test1.cem.g ; else echo creating test1.cem.g ; cp test1.cem.r test1.cem.g ; fi
***** ctgen
sed -f bf.sed <OPS >bf.c
-acc -DNOFLOAT bf.c
-bf.c
+compiling bf.c
running bf.cem
comparing bf
+sed -f bfu.sed <OPS >bfu.c
+compiling bfu.c
+running bfu.cem
+comparing bfu
sed -f cel.sed <OPS >cel.c
-acc -DNOFLOAT cel.c
-cel.c
+compiling cel.c
running cel.cem
comparing cel
sed -f clu.sed <OPS >clu.c
-acc -DNOFLOAT clu.c
-clu.c
+compiling clu.c
running clu.cem
comparing clu
sed -f ec.sed <OPS >ec.c
-acc -DNOFLOAT ec.c
-ec.c
+compiling ec.c
"ec.c", line 58: (warning) overflow in constant expression
"ec.c", line 64: (warning) overflow in constant expression
running ec.cem
comparing ec
sed -f ef.sed <OPS >ef.c
-acc -DNOFLOAT ef.c
-ef.c
+compiling ef.c
running ef.cem
comparing ef
-0a1,$
+0a1,72
> .4e-5 + .3e-5
> .4e-5 - .3e-5
> .4e-5 / .3e-5
> yes if ( x -- ) yes() ; else no() 2.141500e+00
> yes if ( -- x ) yes() ; else no() 2.141500e+00
> yes if ( ++ x ) yes() ; else no() 4.141500e+00
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f ef.cem.g ; then diff ef.cem.r ef.cem.g ; else echo creating ef.cem.g ; cp ef.cem.r ef.cem.g ; fi
sed -f ei.sed <OPS >ei.c
-acc -DNOFLOAT ei.c
-ei.c
+compiling ei.c
running ei.cem
comparing ei
sed -f el.sed <OPS >el.c
-acc -DNOFLOAT el.c
-el.c
+compiling el.c
running el.cem
comparing el
sed -f eu.sed <OPS >eu.c
-acc -DNOFLOAT eu.c
-eu.c
+compiling eu.c
running eu.cem
comparing eu
sed -f id.sed <OPS >id.c
-acc -DNOFLOAT id.c
-id.c
+compiling id.c
running id.cem
comparing id
-0a1,$
+0a1,72
> (-40) + 300
> (-40) - 300
> (-40) / 300
> yes if ( x -- ) yes() ; else no() 2.141500e+00
> yes if ( -- x ) yes() ; else no() 2.141500e+00
> yes if ( ++ x ) yes() ; else no() 4.141500e+00
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f id.cem.g ; then diff id.cem.r id.cem.g ; else echo creating id.cem.g ; cp id.cem.r id.cem.g ; fi
sed -f lc.sed <OPS >lc.c
-acc -DNOFLOAT lc.c
-lc.c
+compiling lc.c
"lc.c", line 60: (warning) overflow in constant expression
"lc.c", line 66: (warning) overflow in constant expression
running lc.cem
comparing lc
sed -f ld.sed <OPS >ld.c
-acc -DNOFLOAT ld.c
-ld.c
+compiling ld.c
running ld.cem
comparing ld
-0a1,$
+0a1,72
> .4e-5 + .3e-5
> .4e-5 - .3e-5
> .4e-5 / .3e-5
> yes if ( x -- ) yes() ; else no() 2.141500e+00
> yes if ( -- x ) yes() ; else no() 2.141500e+00
> yes if ( ++ x ) yes() ; else no() 4.141500e+00
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f ld.cem.g ; then diff ld.cem.r ld.cem.g ; else echo creating ld.cem.g ; cp ld.cem.r ld.cem.g ; fi
sed -f lf.sed <OPS >lf.c
-acc -DNOFLOAT lf.c
-lf.c
+compiling lf.c
running lf.cem
comparing lf
-0a1,$
+0a1,72
> .4e-5 + .3e-5
> .4e-5 - .3e-5
> .4e-5 / .3e-5
> yes if ( x -- ) yes() ; else no() 2.141500e+00
> yes if ( -- x ) yes() ; else no() 2.141500e+00
> yes if ( ++ x ) yes() ; else no() 4.141500e+00
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f lf.cem.g ; then diff lf.cem.r lf.cem.g ; else echo creating lf.cem.g ; cp lf.cem.r lf.cem.g ; fi
sed -f li.sed <OPS >li.c
-acc -DNOFLOAT li.c
-li.c
+compiling li.c
running li.cem
comparing li
sed -f ll.sed <OPS >ll.c
-acc -DNOFLOAT ll.c
-ll.c
+compiling ll.c
running ll.cem
comparing ll
sed -f lu.sed <OPS >lu.c
-acc -DNOFLOAT lu.c
-lu.c
+compiling lu.c
running lu.cem
comparing lu
***** ctill
All program(s) in this directory should fail to compile.
-acc -DNOFLOAT noarg.c
-noarg.c
+compiling noarg.c
"noarg.c", line 14: name not in parameter list
*** Error code 1
-`gen' not remade because of errors
+The following command caused the error:
+acc -DNOFLOAT -o noarg.cem noarg.c 1>/dev/null
+make: Warning: Target `gen' not remade because of errors
***** ctinit
-acc -DNOFLOAT init.c
-init.c
+compiling init.c
running init.cem
comparing init
-41,$c41,$
-< long
-<
-< lo1 14
-< lo2 -17
-< lo3 2147483647
-< lo4 -2147483648
-< lo5 0
-< lo6 1
-<
-< structures
-<
-< st1 sta[0..2]
-< s_i 0 1 2 3
-< s_ca[0] 0 97 0 0
-< s_ca[1] 0 98 0 0
-< s_ca[2] 0 99 0 0
-< s_l 0 10 0 0
-< (sta[0].s_s1)->s_i = 1
-<
-< bit fields:
-<
-< sizeof stb 8
-< stb -1 -2 3 4 -1 6 7
-<
----
+40a41,86
> Floats:
>
> fl1 0.00000000000000000000e+00
> fl2 2.00000000000000000000e+00
> fl2 2.00000000000000000000e+00
> fl4 4.00000000000000000000e+00
-> fl5 2.93873587705571892581e-39
-> fl6 1.70141173319264428000e+38
+> fl5 2.93873587705571876995e-39
+> fl6 1.70141173319264429908e+38
> fl7 0.00000000000000000000e+00
> fla1 fla2 fla3
> 1.000000e+00 -1.000000e+00 1.100000e+01
> dbl2 2.00000000000000000000e+00
> dbl2 2.00000000000000000000e+00
> dbl4 4.00000000000000000000e+00
-> dbl5 2.93873600000000034793e-39
-> dbl6 1.70141170000000000000e+38
+> dbl5 2.93873600000000015650e-39
+> dbl6 1.70141169999999996199e+38
> dbl7 0.00000000000000000000e+00
> dbla1 dbla2 dbla3
> 1.000000e+00 -1.000000e+00 1.100000e+01
> 0.000000e+00 0.000000e+00 0.000000e+00
> 0.000000e+00 0.000000e+00 0.000000e+00
>
-> long
->
-> lo1 14
-> lo2 -17
-> lo3 2147483647
-> lo4 -2147483648
-> lo5 0
-> lo6 1
->
-> structures
->
-> st1 sta[0..2]
-> s_i 0 1 2 3
-> s_ca[0] 0 97 0 0
-> s_ca[1] 0 98 0 0
-> s_ca[2] 0 99 0 0
-> s_l 0 10 0 0
+57a104,105
> s_f 0.000000e+00 -1.000000e+01 0.000000e+00 0.000000e+00
>
-> (sta[0].s_s1)->s_i = 1
->
-> bit fields:
->
-> sizeof stb 8
-> stb -1 -2 3 4 -1 6 7
->
-*** Error code 1 (ignored)
+The following command caused the error:
+if test -f init.cem.g ; then diff init.cem.r init.cem.g ; else echo creating init.cem.g ; cp init.cem.r init.cem.g ; fi
***** ctmargt
-acc -DNOFLOAT margt.c
-margt.c
+compiling margt.c
running margt.cem
comparing margt
+5c5
+< CEM=acc -DNOFLOAT
+---
+> CEM=acc
+The following command caused the error:
+if test -f margt.cem.g ; then diff margt.cem.r margt.cem.g ; else echo creating margt.cem.g ; cp margt.cem.r margt.cem.g ; fi
***** ctprof
test profiling
procentry.c
-acc -DNOFLOAT tp.c procentry.m
+compiling tp.c procentry.m
tp.c
procentry.m
-running tp
+running tp.cem
comparing tp
***** ctsetjmp
-acc -DNOFLOAT stjmp.c
-stjmp.c
+compiling stjmp.c
running stjmp.cem
comparing stjmp
***** ctstruct
-acc -DNOFLOAT str.c
-str.c
+compiling str.c
running str.cem
comparing str
***** ctsys
-acc -DNOFLOAT tfork.c
-tfork.c
+compiling tfork.c
running tfork.cem
comparing tfork
-1,$c1,$
-< childno 26404
-< Child 26404, status 0x800
-< fork/wait ok
----
-> childno 16276
-> Child 16276, status 0x800
-> fork/wait ok
-*** Error code 1 (ignored)
-Tue Apr 26 14:49:48 MET DST 1988
+Fri Nov 17 15:44:00 MET 1989
-Tue Apr 26 14:08:56 MET DST 1988
+Fri Nov 17 14:55:28 MET 1989
+Compilation command: acc
***** ctconv
-acc -fp conv.c
-conv.c
+compiling conv.c
"conv.c", line 38: (warning) overflow in constant expression
running conv.cem
comparing conv
***** ctdecl
-acc -fp decl.c
-decl.c
+compiling decl.c
running decl.cem
comparing decl
***** ctdivers
-acc -fp ops.c
-ops.c
+compiling ops.c
running ops.cem
comparing ops
***** cterr
-acc -fp bugs.c
-bugs.c
+compiling bugs.c
"bugs.c", line 88: (warning) overflow in constant expression
running bugs.cem
comparing bugs
***** ctest1
-acc -fp test.c
-test.c
+compiling test.c
running test.cem
comparing test
***** ctest2
-acc -fp t7.c
-t7.c
+compiling t7.c
running t7.cem
comparing t7
***** ctest3
-acc -fp test2.c
-test2.c
+compiling test2.c
running test2.cem
comparing test2
***** ctest5
-acc -fp test1.c
-test1.c
+compiling test1.c
"test1.c", line 375: (warning) incompatible pointers in =
"test1.c", line 376: (warning) incompatible pointers in =
"test1.c", line 377: (warning) incompatible pointers in =
comparing test1
***** ctgen
sed -f bf.sed <OPS >bf.c
-acc -fp bf.c
-bf.c
+compiling bf.c
running bf.cem
comparing bf
+sed -f bfu.sed <OPS >bfu.c
+compiling bfu.c
+running bfu.cem
+comparing bfu
sed -f cel.sed <OPS >cel.c
-acc -fp cel.c
-cel.c
+compiling cel.c
running cel.cem
comparing cel
sed -f clu.sed <OPS >clu.c
-acc -fp clu.c
-clu.c
+compiling clu.c
running clu.cem
comparing clu
sed -f ec.sed <OPS >ec.c
-acc -fp ec.c
-ec.c
+compiling ec.c
"ec.c", line 58: (warning) overflow in constant expression
"ec.c", line 64: (warning) overflow in constant expression
running ec.cem
comparing ec
sed -f ef.sed <OPS >ef.c
-acc -fp ef.c
-ef.c
+compiling ef.c
running ef.cem
comparing ef
sed -f ei.sed <OPS >ei.c
-acc -fp ei.c
-ei.c
+compiling ei.c
running ei.cem
comparing ei
sed -f el.sed <OPS >el.c
-acc -fp el.c
-el.c
+compiling el.c
running el.cem
comparing el
sed -f eu.sed <OPS >eu.c
-acc -fp eu.c
-eu.c
+compiling eu.c
running eu.cem
comparing eu
sed -f id.sed <OPS >id.c
-acc -fp id.c
-id.c
+compiling id.c
running id.cem
comparing id
sed -f lc.sed <OPS >lc.c
-acc -fp lc.c
-lc.c
+compiling lc.c
"lc.c", line 60: (warning) overflow in constant expression
"lc.c", line 66: (warning) overflow in constant expression
running lc.cem
comparing lc
sed -f ld.sed <OPS >ld.c
-acc -fp ld.c
-ld.c
+compiling ld.c
running ld.cem
comparing ld
sed -f lf.sed <OPS >lf.c
-acc -fp lf.c
-lf.c
+compiling lf.c
running lf.cem
comparing lf
sed -f li.sed <OPS >li.c
-acc -fp li.c
-li.c
+compiling li.c
running li.cem
comparing li
sed -f ll.sed <OPS >ll.c
-acc -fp ll.c
-ll.c
+compiling ll.c
running ll.cem
comparing ll
sed -f lu.sed <OPS >lu.c
-acc -fp lu.c
-lu.c
+compiling lu.c
running lu.cem
comparing lu
***** ctill
All program(s) in this directory should fail to compile.
-acc -fp noarg.c
-noarg.c
+compiling noarg.c
"noarg.c", line 14: name not in parameter list
*** Error code 1
-`gen' not remade because of errors
+The following command caused the error:
+acc -o noarg.cem noarg.c 1>/dev/null
+make: Warning: Target `gen' not remade because of errors
***** ctinit
-acc -fp init.c
-init.c
+compiling init.c
running init.cem
comparing init
-47,48c47,48
-< fl5 2.93873587705571956974e-39
-< fl6 1.70141173319264450000e+38
----
-> fl5 2.93873587705571892581e-39
-> fl6 1.70141173319264428000e+38
-70c70
-< dbl5 2.93873600000000188004e-39
----
-> dbl5 2.93873600000000034793e-39
-*** Error code 1 (ignored)
***** ctmargt
-acc -fp margt.c
-margt.c
+compiling margt.c
running margt.cem
comparing margt
***** ctprof
test profiling
procentry.c
-acc -fp tp.c procentry.m
+compiling tp.c procentry.m
tp.c
procentry.m
-running tp
+running tp.cem
comparing tp
***** ctsetjmp
-acc -fp stjmp.c
-stjmp.c
+compiling stjmp.c
running stjmp.cem
comparing stjmp
***** ctstruct
-acc -fp str.c
-str.c
+compiling str.c
running str.cem
comparing str
***** ctsys
-acc -fp tfork.c
-tfork.c
+compiling tfork.c
running tfork.cem
comparing tfork
-1,$c1,$
-< childno 25349
-< Child 25349, status 0x800
-< fork/wait ok
----
-> childno 16276
-> Child 16276, status 0x800
-> fork/wait ok
-*** Error code 1 (ignored)
-Tue Apr 26 14:26:04 MET DST 1988
+Fri Nov 17 15:08:47 MET 1989
-To run this test, first copy makefile.std to makefile, and adapt the
-CEM variable; set it to the compiler you want to test.
+To run this test, set the CEM variable to the compilation command,
+and the RUN variable to the run command (name of the interpreter or empty).
+For instance:
+
+ CEM=acc -mem24; export CEM
+ RUN=em; export RUN
+
Then type: sh run > out 2>&1 &
The test are subdivided into several directories.
-make "P=conv" -fsk ../makefile ${1-gen}
+make "P=conv" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
-make "P=decl" -fsk ../makefile ${1-gen}
+make "P=decl" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
-make "P=ops" -fskk ../makefile ${1-gen}
+make "P=ops" "CEM=${CEM-acc}" "RUN=${RUN-}" -fskk ../makefile ${1-gen}
-make "P=bugs" -fsk ../makefile ${1-gen}
+make "P=bugs" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
-make "P=test" -fsk ../makefile ${1-gen}
+make "P=test" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
-make "P=t7" -fsk ../makefile ${1-gen}
+make "P=t7" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
-make "P=test2" -fsk ../makefile ${1-gen}
+make "P=test2" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
-make "P=test1" -fsk ../makefile ${1-gen}
+make "P=test1" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
make "TS=$1"
;;
esac
-make "P=$1" -fk ../makefile $2
+make "P=$1" "CEM=${CEM-acc}" "RUN=${RUN-}" -fk ../makefile $2
rm -f $1.[ckmos]
echo "All program(s) in this directory should fail to compile."
-make "P=noarg" -fsk ../makefile ${1-gen}
+make "P=noarg" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
fl2 2.00000000000000000000e+00
fl2 2.00000000000000000000e+00
fl4 4.00000000000000000000e+00
-fl5 2.93873587705571892581e-39
-fl6 1.70141173319264428000e+38
+fl5 2.93873587705571876995e-39
+fl6 1.70141173319264429908e+38
fl7 0.00000000000000000000e+00
fla1 fla2 fla3
1.000000e+00 -1.000000e+00 1.100000e+01
dbl2 2.00000000000000000000e+00
dbl2 2.00000000000000000000e+00
dbl4 4.00000000000000000000e+00
-dbl5 2.93873600000000034793e-39
-dbl6 1.70141170000000000000e+38
+dbl5 2.93873600000000015650e-39
+dbl6 1.70141169999999996199e+38
dbl7 0.00000000000000000000e+00
dbla1 dbla2 dbla3
1.000000e+00 -1.000000e+00 1.100000e+01
-make "P=init" -fsk ../makefile ${1-gen}
+make "P=init" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
Arguments:
margt.cem
Environment:
- HOME=/usr/em
- PATH=:/bin:/usr/ucb:/usr/local:/usr/bin:/usr/em/bin
- SHELL=/usr/local/esh
- TERM=dialup
+ CEM=acc
+ HOME=/usr/proj/em
+ LOGNAME=em
+ MAKEFLAGS=sk
+ P=margt
+ PATH=/usr/proj/em/Work/bin::/usr/ucb:/bin:/usr/bin
+ RUN=
+ SHELL=/bin/sh
+ TERM=network
USER=em
-make "P=margt" -fsk ../makefile ${1-gen}
+make "P=margt" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
procentry.m: procentry.c
$(CEM) -c.m procentry.c
tp.cem: tp.c procentry.m
- echo $(CEM) tp.c procentry.m
+ echo compiling tp.c procentry.m
$(CEM) -p -o tp.cem -O tp.c procentry.m
rm -f procentry.[kosm] tp.[kmos]
echo test profiling
case ${1-gen} in
gen|tp.cem.r)
- make -k "`grep CEM= ../makefile`" tp.cem
- make "P=tp" -fsk ../makefile ${1-gen}
+ make -k "CEM=${CEM-acc}" tp.cem
+ make "P=tp" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
;;
*)
- make -k "`grep CEM= ../makefile`" $1
+ make -k "CEM=${CEM-acc}" "RUN=${RUN-}" $1
;;
esac
-make "P=stjmp" -fsk ../makefile ${1-gen}
+make "P=stjmp" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
-make "P=str" -fsk ../makefile ${1-gen}
+make "P=str" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
-make "P=tfork" -fsk ../makefile ${1-gen}
+make "P=tfork" "CEM=${CEM-acc}" "RUN=${RUN-}" -fsk ../makefile ${1-gen}
}
if ( child ) {
/* The parent */
- printf("childno %d\n",child ) ;
+ /* printf("childno %d\n",child ) ; */
do {
waitchild= wait(&status ) ;
- printf("Child %d, status 0x%x\n",waitchild,status) ;
+ /* printf("Child %d, status 0x%x\n",waitchild,status) ;*/
if ( waitchild== -1 ) {
printf("No children\n") ;
return 1 ;
-childno 16276
-Child 16276, status 0x800
fork/wait ok
-diff3 $P.*.r | tee diffs
egen: $P.e
echo comparing $P.e
- -if test -f $P.e.g ; then diff -h $P.e $P.e.g ; else echo creating $P.e.g ; cp $P.e $P.e.g ; fi
+ -if test -f $P.e.g ; then diff $P.e $P.e.g ; else echo creating $P.e.g ; cp $P.e $P.e.g ; fi
rm -f $P.e
$P.e: $P.c
$(CEM) -c.e $P.c
rm -f $P.cc
$P.cem.r: $P.cem
echo running $P.cem
- -$P.cem >$P.cem.r
+ -$(RUN) $P.cem >$P.cem.r
rm -f $P.cem
$P.pcc: /tmp
echo pcc $P.c
echo cc $P.c
cc -o $P.cc $P.c
$P.cem: /tmp
- echo $(CEM) $P.c
- $(CEM) -o $P.cem $P.c
+ echo compiling $P.c
+ $(CEM) -o $P.cem $P.c 1>/dev/null
gen: $P.cem.r
echo comparing $P
- -if test -f $P.cem.g ; then diff -h $P.cem.r $P.cem.g ; else echo creating $P.cem.g ; cp $P.cem.r $P.cem.g ; fi
+ -if test -f $P.cem.g ; then diff $P.cem.r $P.cem.g ; else echo creating $P.cem.g ; cp $P.cem.r $P.cem.g ; fi
install cmp:
pr:
- @pr `pwd`/$P.c `pwd`/$P.cem.g
+ pr `pwd`/$P.c `pwd`/$P.cem.g
opr:
make pr | opr
date
+if test -f makefile
+then
+ :
+else
+ cp makefile.std makefile
+fi
+CEM="${CEM-acc}"
+RUN="${RUN-}"
+export CEM RUN
+echo "Compilation command: $CEM"
+case $RUN in
+?*)
+ echo "Run command: $RUN"
+ ;;
+esac
for A in ct*
do (
echo "***** $A"