Add README.

diff --git a/Kernel/platform-nc200/README.md b/Kernel/platform-nc200/README.md
new file mode 100644 (file)
index 0000000..cb4b9c0
--- /dev/null
+++ b/Kernel/platform-nc200/README.md
@@ -0,0 +1,18 @@
+This is a work-in-progress port to the NC200 which boots (and hopefully runs)
+from floppy (using an SRAM card).
+
+To use, format a disk (preferably on the NC200 itself, as the interleave
+settings used by the NC200 will cause it to load much more quickly), and do:
+
+```
+cd Kernel
+make TARGET=nc200
+dd if=fuzixfloppy.img of=/dev/fd0 bs=1k
+```
+
+Insert the disk into the NC200, turn on, and press Function+R. The kernel
+will be loaded from floppy, programmed into the SRAM card, and run.
+
+The current state is that there's just enough working to display the Fuzix
+startup banner, most times. It's certainly not suitable for real use. Your
+kilometreage may vary.
\ No newline at end of file