Finally up MAX_BANKS in platform/config.h accordingly.
-Setting It Up
+Setting It Up (current xtrs: https://github.com/TimothyPMann/xtrs)
+
+ This needs patches currently in progress
+
+ # Tool to make disk images
+ make tools/makejv3
+ # Double density single sided 40 track boot disk
+ tools/makejv3 dd40s /dev/zero disk4p-0
+ # Build kernel and boot block (edit Makefile, set target then)
+ make
+ # Add pieces to the disk (boot block in sector 0, kernel at end)
+ dd if=zout/trs80load.cim of=disk4p-0 bs=1 seek=8960 conv=notrunc
+ dd if=fuzix.bin of=disk4p-0 bs=1 seek=142336 conv=notrunc
+ # Once we get that far you can also put a filesystem in the lower
+ # blocks
+ #
+ xtrs -model 4p -emtsafe
+
+To set up for hard disk, create a hard disk with the xtrs tools and
+
+ mkdisk -h hard4p-0
+ # This assumes the default disk size
+ cd Standalone/filesystem-src
+ ./build-filesystem trs80.hd 256 21760
+ dd if=trs80.hd of=hard4p-0 bs=256 seek=1 conv=notrunc
+ tools/trslabel hard4p-0
+ #
+ xtrs -model 4p -emtsafe
+
+
+Setting It Up (patched SDLTRS)
# Tool to make disk images
make tools/makejv3
sdltrs -model 4p -emtsafe -disk0 mydisk.jv3 -hard0 hard4-0
+
You will still need a boot floppy at this point but just boot with device
0 (or hit return). Swap is configured to be on the end of the hard disk